Panasonic TH-65EF1U Operating Instructions (Functional Manual) Download Page 63

Page: 63 / 98

English

POWER button lock

Sets the lock setting for the display <Main Power On /

Off button>.

[On]:

<Main Power On / Off button> operation is

disabled.

[Off]:

<Main Power On / Off button> operation is

enabled.

Note

●

This function is only for TH-65EF1U.

Initialization

When both main unit buttons and remote control buttons

are disabled due to the [Button lock], [Controller user

level] and [Controller ID function] settings, set all the

values [Off] so that all the buttons are enabled again.

Press <- (Unit)> together with <RETURN>

and hold for more than 5 seconds.

[Shipping] is displayed and the lock is released when

it disappears.

Shipping

YES

●

Settings for [Button lock], [Controller user level]

and [Controller ID function] will be back to [Off].

Summary of Contents for TH-65EF1U



































































































Search results

Summary of Contents for TH-65EF1U

Reviews:

Panasonic TH-65EF1U, Operating Instructions (Functional Manual), Page: 63 / 98

Search results

Summary of Contents for TH-65EF1U

Reviews: