background image

7

English

Do not remove the cover or modify it in any way.

 

High voltages which can cause severe electric shocks 

are present inside the Display. For any inspection, 

adjustment and repair work, please contact your local 

Panasonic dealer.

Ensure that the mains plug is easily accessible.
The mains plug shall be connected to a mains 

socket outlet with a protective earthing connection.
Do not use any power supply cord other than that 

provided with this unit.

 

Doing so may cause short-circuit, generates heat, 

etc., which could cause electric shock or fire.

Do not use the supplied power supply cord with any 

other devices.

 

Doing so could cause electric shock or fire.

Securely insert the power supply plug as far as it 

will go.

 

If the plug is not fully inserted, heat may be generated 

which could cause fire. If the plug is damaged or the 

wall socket is loose, they shall not be used.

Do not handle the power supply plug with wet 

hands.

 

Doing so may cause electric shocks.

Do not do anything that may damage the power 

cable. When disconnecting the power cable, pull on 

the plug body, not the cable.

 

Do not damage the cable, make any modifications 

to it, place heavy objects on top of it, heat it, place it 

near any hot objects, twist it, bend it excessively or 

pull it. To do so may cause fire and electric shock. If 

the power cable is damaged, have it repaired at your 

local Panasonic dealer.

Do not touch the power supply cord or the plug 

directly by hand when they are damaged.

 

Electric shock could occur.

Do not remove covers and NEVER modify the 

Display yourself

 

Do not remove the rear cover as live parts are 

accessible when it is removed. There are no user 

serviceable parts inside. (High-voltage components 

may cause serious electrical shock.)

 

Have the Display checked, adjusted, or repaired at 

your local Panasonic dealer.

Keep the AAA/R03/UM4 batteries (supplied) out of 

reach of children. If accidentally swallowed, it will be 

harmful to the body.

 

Please contact a doctor immediately in case you 

doubt that the child may have swallowed it.

If the Display is not going to be used for any 

prolonged length of time, unplug the power supply 

plug from the wall outlet.
Picture noise may occur if you connect / disconnect 

the cables connected to the input terminals you 

are currently not watching, or if you turn the power 

of the video equipment on / off, but it is not a 

malfunction.

To prevent the spread of fire, keep 

candles or other open flames away from 

this product at all times.

 CAUTION

If problems or malfunction occur, stop using 

immediately.

 

If problems occur, unplug the power supply 

plug.

 

Smoke or an abnormal odour come out from the unit.

 

No picture appears or no sound is heard, 

occasionally.

 

Liquid such as water or foreign objects got inside the 

unit.

 

The unit has deformed or broken parts.

If you continue to use the unit in this condition, it 

could result in fire or electric shock.

 

Turn the power off immediately, unplug the power 

supply plug from the wall outlet, and then contact the 

dealer for repairs.

 

To cut off the power supply to this Display completely, 

you need to unplug the power supply plug from the 

wall outlet.

 

Repairing the unit yourself is dangerous, and shall 

never be done.

 

To enable to unplug the power supply plug 

immediately, use the wall outlet which you can reach 

easily.

 

Do not touch the unit directly by hand when 

it is damaged.

Electric shock could occur.

 

When using the LCD Display 

Do not bring your hands, face or objects close to the 

ventilation holes of the Display.

 

Heated air comes out from the ventilation holes at the 

top of Display will be hot. Do not bring your hands or 

face, or objects which cannot withstand heat, close to 

this port, otherwise burns or deformation could result.

At least 2 people are required to carry or unpack 

this unit.

 

If this is not observed, the unit may drop, resulting in 

injury.

Be sure to disconnect all cables before moving the 

Display.

 

If the Display is moved while some of the cables are 

still connected, the cables may become damaged, 

and fire or electric shock could result.

Disconnect the power supply plug from the wall 

socket as a safety precaution before carrying out 

any cleaning.

 

Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it 

becoming dusty.

 

If dust built up on the power cord plug, the resultant 

humidity can damage the insulation, which could 

result in fire. Pull the power cord plug out from the 

wall outlet and wipe the mains lead with a dry cloth.

Summary of Contents for TH-65EF1E


























Reviews: