44
English
■
Menu screen of settings
Setup
Scheduler
Signal Check Priority
Control Setting
Sleep Timer
No Activity Power Off
Off
OFF
Off
Disable
On
Power On Message
Initial Startup
EDID
Software Update(USB)
Last Memory
300 Sec
1.4
Power Management Setting
Restore Default
Menu screen of settings
[Scheduler]
Changes the settings of the scheduler.
[Signal Check Priority]
Sets priority of the signal between 1 and 5 ([Priority 1] is the highest). When the existing
source signal is lost, the display will search for a new signal source according to the
signal check priority.
•
When [Signal Check Priority] is enabled, the display will search for an enabled signal
source according to the settings of signal check priority when the power supply is
turned on.
•
When there is no signal source of [Priority 1], the display will check other sources in
the higher order of priority and it will appropriately change the source.
•
When the highest priority signal source is restored, the display will automatically
changeover to this source once again.
•
When [Signal Check Priority] is disabled, the display will use the source used last
when the power supply is turned on.
•
When [Signal Check Priority] is enabled, the system will automatically play USB if the
source was USB when the power supply was on.
--
--
--
--
--
Signal Check Priority
Enable Signal Check
Input
Priority 1
Priority 2
Priority 3
Priority 4
Priority 5
Reset Setting
[Control Setting]
Select so that the LCD display is controlled via the serial terminal.
[Sleep Timer]
Changes the settings of sleep timer, or turns off the sleep timer.
[No Activity Power Off]
Enables / disables the function of automatic standby when the device is not operated
for about 4 hours or more.
[Power On Message]
You can show / hide the startup message display when [No Activity Power Off] is
enabled.
•
You cannot set this if [No Activity Power Off] is [Disable].
[Initial Startup]
[Last Memory], [Standby], [On]
[Power Management
Setting]
Changes the settings of power management, or turns off the power management mode.
[EDID]
Setting the EDID version to suit for video equipment will enhance the compatibility
between this unit and video equipment.
[2.0]: Enhances the compatibility to the equipment that can output images of resolution
higher than 1 920 x 1 200.
[1.4] (Default setting): Enhances the compatibility to the equipment that can output
images of resolution 1 920 x 1 200 or less.
•
When no image is output from video output devices (PC, DVD player, etc.), switching
the setting of EDID.
[Software
Update(USB)]
Updates the software via the USB terminal (for service).
[Restore Default]
Settings will be restored to the factory default settings.