manualshive.com logo in svg

Panasonic TH-65BFE1W, Operating Instructions Manual, Page: 31 / 53

Share
Download
Panasonic TH-65BFE1W Operating Instructions Manual Download Page 31

31

English

6

Playback the media files by using the media playback buttons (Rewind (

), Play ( ), Forward (

), Previous 

(

), Stop ( ), Pause (

), Next (

)).

7

While the content files are played with this method, coloured buttons of the remote control will be enabled.
Function of each button is decided with the mode of the media source, and it will be displayed at the bottom of the 

OSD menu of LCD display. Refer to “Remote control buttons when using the play guide” on page 36.
Functions of menu buttons of LCD display will also change. The following table describes the function of each 

menu button when USB input is selected.

Functions of the menu buttons when USB input is selected

Definition of keypad

Status of selection of USB input

Key name

Media root page

Media list / play list mode

Media player mode

Menu

Input source key

End

End

Input

OK

In file: Play / Stop
In folder: [OK] key
In OSD’s dialogue: [OK] key

Play / Stop

Increase the volume

Right key

Right key

Increase the volume

Decrease the volume

Left key

Left key

Decrease the volume

Up

Up key

Up key

Next image / music file / 

video

Down

Down key

Down key

Previous image / music file 

/ video

Power supply

Power supply off

Power supply off

Power supply off

 

■

Supported devices

● 

Commercially available USB flash drives are supported. (USB flash drives with security function are not supported. 

Operation is not guaranteed.)

● 

You can only use USB flash drives that are formatted in FAT16 or FAT32.

● 

Maximum memory size of USB is 32 GB.

● 

Only USB flash drives with single partition configuration is supported.

Note

● 

Maximum size of one file is up to 2 GB.

● 

There are files that cannot be played even if such files are in the supported formats mentioned here.

● 

Files protected with digital copyright management (DRM) cannot be played. 

● 

Make sure that both audio codec and video codec are supported. When the audio codec of a video file is in 

unsupported format, video may not be correctly displayed.

● 

When the number of pixels of the file exceeds the screen size, the image quality will change. 

Summary of Contents for TH-65BFE1W






















































Reviews:

No comments