27
English
■
Power management function
In terms of power saving feature, the device supports the following 4 power off functions.
[Sleep Timer]
•
You can set the timer and turn off the power supply of the display irrespective of the current status of signal of the
source.
You can set the sleep timer in the OSD menu to [5 Min], [15 Min], [30 Min], [60 Min], [90 Min], [120 Min], [180 Min],
and [Off].
•
This value will not be saved. Only one value will be executed. Default setting is [Off].
[Power Management Setting]
•
It will turn off the power supply of the display (standby mode) when there is no input signal from the current source.
This is applicable to HDMI/DVI-D/PC input. This setting can be adjusted in the range of 30 seconds to 300 seconds
or can be set to [Disable].
•
This value will be saved. Default setting is [300 Sec].
•
When the power supply is turned off (standby mode) because of this function, if the signal is once again fed to the
same input that turned off, power supply of the display will turn on.
•
It will show the remaining number of seconds starting from 20 seconds before the power supply turns off.
Note
●
Power management function may not work normally depending on the video output device. In this case, set this
function to [Off].
[No Activity Power Off]
•
If this is set to [Enable], the power supply will automatically turn off (standby) when the device is not operated for
more than 4 hours.
•
It will show the remaining time starting from 3 minutes before the power supply turns off.
•
When the power supply has turned off because of this function, [Last turn off due to ‘No Activity Power Off’.] will
appear when the power supply is started next time.
[Scheduler]
•
You can set 7 schedules that decide the power supply on time and the power supply off time. Refer to the Scheduler
function for detailed settings. (see page 46)
Note
●
The display has the priority mode that sets priority of each setting. (see page 44)
•
The settings of [Scheduler] will have higher priority than the settings of [Sleep Timer] and power management.
•
[Sleep Timer] and power management has the same priority. When both are enabled, power supply off time is
decided depending on the setting of power management or [Sleep Timer].
Power indicator
Status
LED
Main power supply off
Light out
Power supply off mode
Red
Power supply standby when [Scheduler] is enabled
Orange
Power supply on mode
Green
Diagnosis (defects are detected)
When blinks in red colour: Contact your dealer.