manualshive.com logo in svg

Panasonic TH-55VF1HU, Operating Informations

Share
Download
Panasonic TH-55VF1HU Operating Informations Download Page 90

English

90

Command

Control

AVMT

Shutter control

10:  Picture On  

(picture mute deactivated)

11:  Picture Off  

(picture on mute)

20:   Audio  On   

(audio mute deactivated)

21:   Audio  Off   

(audio on mute)

30:  Shutter mode Off  

(picture and audio mute 

deactivated)

31:  Shutter mode On  

(picture and audio on mute)

AVMT?

Shutter control query

11:  Picture Off (picture on mute)
21:  Audio Off (audio on mute)
30:  Shutter mode Off  

(picture and audio mute 

deactivated)

31:  Shutter mode On  

(picture and audio on mute)

ERST?

Error status query

First byte: 0
Second byte: 0
Third byte: 0
Fourth byte: 0
Fifth byte: 0
Sixth byte:  Other error. 0 or 2.

● 

Meaning of 0, 2.
0:  Error is not detected,
2: Error

LAMP?

Lamp status query

Not supported

INST?

Input switch list query

11:  PC IN input (PC)
21:  COMPONENT/RGB IN input 

(COMPONENT)

22:  VIDEO input (VIDEO)
31:  HDMI input (HDMI)
32: DisplayPort input (DisplayPort)
33:  DIGITAL LINK input  

(DIGITAL LINK)

34:  DVI-D IN 1 input (DVI-D1)
35:  DVI-D IN 2 input (DVI-D2)
41:  USB input (USB)

NAME?

Display name query

The name selected in [Network 

settings] - [Display name] is returned.

INF1?

Manufacturer name query

Returns “Panasonic”.

Command

Control

INF2?

Model name query

Returns “55VF1HU” / “55VF1HW”.
(Example: 55-inch VF1HU / VF1HW 

model)

INFO?

Other information query

Returns version number.

CLSS?

Class information query

Returns “1”.

PJLink security authentication

The password used for PJLink is the same as the 

password set for the WEB control. (see page 92)
When using PJLink without security authorization, set 

use without the password (blank) for administrator 

privileges and the password for user privileges of Web 

browser control.

● 

Concerning the specification of PJLink, see the web 

site of Japan Business Machine and Information 

System Industries Association (JBMIA) below:
http://pjlink.jbmia.or.jp/english/index.html

Early Warning Software

This unit supports “Early Warning Software” which 

monitors the statuses of devices (projectors or flat-panel 

displays) connected to an intranet, reports failures of 

devices and gives advance warning by detecting a 

predicted abnormality.
The maximum number of devices that can be registered 

to monitor differs according to the type of license. Up 

to 2048 devices can be registered and used for free for 

a maximum of 90 days after the installation to PC has 

completed.

● 

For more details, visit the following web site.
http://panasonic.net/prodisplays/products/et-swa100/index.html

Multi Monitoring & Control Software

This unit supports “Multi Monitoring & Control Software” 

which monitors and controls devices (projectors or flat-

panel displays) connected to an intranet.
For details, see the following website.
http://panasonic.net/prodisplays/download/software/index.html

Video Wall Manager

This unit supports the “Video Wall Manager” software 

which adjusts multiple displays simultaneously or 

separately on one computer without rearranging cables.
For more details, visit the following web site.
http://panasonic.net/prodisplays/download/software/index.html

Summary of Contents for TH-55VF1HU


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands