manualshive.com logo in svg

Panasonic TH-55VF1HU, Operating Informations

Share
Download
Panasonic TH-55VF1HU Operating Informations Download Page 32

English

32

Basic Controls

Remote Control Sensor / 

Power Indicator
(Back of the unit)

Main power switch (  / )
(Back of the unit)

AC socket outlet

AC cord (supplied)

Operate pointing the remote control directly at 

the unit’s Remote Control Sensor.

Note

● 

Do not put an obstacle between the remote control 

sensor of the main unit and the remote control.

● 

Do not subject the remote control sensor of the main 

unit to the direct sunlight or strong fluorescent light.

1

Connect the AC cord plug to the 

Display.

(see page 16)

2

Connect the plug to the socket outlet.

Note

● 

Main plug types vary between countries. The power 

plug shown at left may, therefore, not be the type 

fitted to your set.

● 

When disconnecting the AC cord, be absolutely sure 

to disconnect the AC cord plug at the socket outlet 

first.

● 

The settings may not be saved if the power plug is 

disconnected or the display is turned off at the <Main 

power switch> immediately after changing settings 

with on-screen menu. Leave enough period of time 

before disconnecting the power plug or switching the 

display off at the <Main power switch>. Or, turn the 

power off with the remote control, RS-232C control or 

LAN control before disconnecting the power plug or 

switching the display off at the <Main power switch>.

3

Switch the <Main power switch>  

(  / ) ON ( ).

 

■

To turn the power ON/OFF with the remote 

control or <Power button (Unit)>:

To turn the power ON

The picture is displayed by pressing <POWER ON> or 

<Power button (Unit)> when the <Main power switch> is 

ON ( ) (Power Indicator: Red or orange).

● 

Power Indicator: Green (Picture is displayed.)

To turn the power OFF

The power is turned OFF (Standby) by pressing 

<STANDBY> or <Power button (Unit)> when the <Main 

power switch> is ON ( ) (Power Indicator: Green).

● 

Power Indicator: Red or orange (standby)

When the power is ON (Picture is displayed.) or OFF 

(standby), the power of the display is turned OFF by 

switching the <Main power switch> OFF ( ).

Note

● 

During operation of the “Power management” function 

(see page 66), the power indicator turns orange in the 

power off state.

Summary of Contents for TH-55VF1HU


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands