![background image](http://html.mh-extra.com/html/panasonic/th-50ph20u/th-50ph20u_operating-instructions-manual_265122018.webp)
18
Basic Controls
Standby (ON / OFF) button
The Plasma Display must rst be plugged
into the wall outlet and turned on at the
power switch (see page 14).
Press this button to turn the Plasma
Display On, from Standby mode. Press
it again to turn the Plasma Display Off to
Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 19)
POS. /SIZE button
(see page 23)
PICTURE button
(see page 25)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
N button
(see page 24, 25, 26, 27)
POSITION buttons
INPUT button
Press to select input signal sequentially.
(see page 16)
Digital Zoom
(see page 22)
Remote Control Transmitter
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 23)
SET UP button
(see page 21)
SOUND button
(see page 27)
Volume Adjustment
Press the Volume Up “+” or Down “–”
button to increase or decrease the
sound volume level.
R button
(see page 21)
Press the R button to return to
previous menu screen.
OFF TIMER button
The Plasma Display can be preset to switch to stand-
by after a xed period. The setting changes to 30
minutes, 60 minutes, 90 minutes and 0 minutes (off
timer cancelled) each time the button is pressed.
30
60
0
90
When three minutes remain, “OFF TIMER 3” will ash.
The off timer is cancelled if a power interruption
occurs.
RECALL button
Press the “RECALL” button to display
the current system status.
1
Input label
2
Aspect mode (see page 19)
Audio input (see page 49)
NANODRIFT SAVER operating
(see page 32)
3
Off timer
The off timer indicator is displayed only
when the off timer has been set.
4
Clock display (see page 46)
OFF TIMER 90
1
2
3
4
1 0 : 0 0
PC
4:3
COMPONENT
NANODRIFT