background image

59

List of Aspect Modes

Aspect mode

Picture   Enlarged screen

Description

All Aspect: 
On

Factory setting
All Aspect: Off

16:9

16:9

The display of the pictures 

fi

 lls the screen.

In the case of SD signals, pictures with a 4:3 aspect 
ratio are enlarged horizontally, and displayed. This 
mode is suited to displaying anamorphic pictures with 
a 16:9 aspect ratio.

14:9

14:9

Letterbox pictures with a 14:9 aspect ratio are enlarged 
vertically and horizontally so that their display 

fi

 lls the 

screen vertically and is slightly smaller than the screen 
horizontally. The top and bottom edges of the pictures 
are cut off. Side panels are displayed at the left and right 
edges of the screen.

Just

Just

Pictures with a 4:3 aspect ratio are enlarged horizontally 
so that the picture distortion is minimized. The display of 
the areas around the left and right edges of the screen 
is slightly elongated.

Just1

Just2

The pictures with a 4:3 aspect ratio among the 16:9 aspect 
ratio signals are enlarged horizontally so that the picture 
distortion is minimized. The left and right edges of the 
pictures are cut off. The display of the areas around the 
left and right edges of the screen is slightly elongated.

4:3

4:3

Pictures with a 4:3 aspect ratio are displayed with their 
original aspect ratio. Side panels are displayed at the 
left and right edges of the screen.

4:3 (1)

4:3 (2)

The pictures with a 4:3 aspect ratio among the 16:9 
aspect ratio signals are displayed with their original 
aspect ratio. The left and right edges of the pictures are 
masked with side panels.

4:3 Full

4:3 Full

The pictures with a 4:3 aspect ratio among the 16:9 
aspect ratio signals are enlarged horizontally so that 
their display 

fi

 lls the screen. The left and right edges of 

the pictures are cut off.

Zoom

Zoom1

Letterbox pictures with a 16:9 aspect ratio are enlarged 
vertically and horizontally so that their display 

fi

 lls the 

screen. The top and bottom edges of the pictures are 
cut off.

Zoom1

Zoom2

Zoom2

The letterbox pictures with a 2.35:1 aspect ratio among 
the 16:9 aspect ratio signals are enlarged vertically and 
horizontally so that their display 

fi

 lls the screen. The top 

and bottom edges as well as the left and right edges of 
the pictures are cut off.

Zoom3

Zoom3

Letterbox pictures with a 2.35:1 aspect ratio are enlarged 
vertically and horizontally so that their display 

fi

 lls the 

screen vertically and is slightly larger than the screen 
horizontally. The top and bottom edges as well as the 
left and right edges of the pictures are cut off.

Summary of Contents for TH-50PB2W

































































Reviews: