Panasonic TH-50PB2W Page 39 Operating Instructions Manual Download

Page: 39 / 64

Express settings

Custom settings

Reset

Extended life settings

Picture Mode
Contrast

Extended life settings

Dynamic

Side panel
NANODRIFT Saver

Lock settings

Peak limit

High

High mid

NANODRIFT Mode

Smooth

unlock

Apply to current input

Apply to all inputs

Off

Recommended settings

Extended life settings

Side panel

Do not display a picture in 4:3 mode for an extended period,
as this can cause an image retention to remain on the side
panels on either side of the display

eld.

To reduce the risk of such an image retention, illuminate
the side panels.

This function may be applicable to the non-picture area.

Off:

Darken both ends.

Low:

Make it dark gray.

Mid:

Make it gray.

High:

Make it light gray.

Notes:

• To reduce the occurrence of image retention, set the Side panel to High.
• The side panel may

ash (alternate black/white) depending on the picture being shown on the screen. Using Cinema

mode will reduce such

ashing.

side panel

4:3 Screen

Display

image

retention

Reduces screen image retention

The following settings are setup to reduce image retention:

Select “Extended life settings” in “Setup” menu and press

button.

Image Retention Reduction Menu

“Extended life settings” enables you to set the following 5 menus (Image Retention Reduction Menu) as recommended
values or set them individually.

Picture Mode
Contrast

“Picture Mode” and “Contrast” are same as “Picture” menu items (see page 26). The settings of this menu will be
re

ected to the “Picture” menu.

Set to the recommended value
Set individually
Reset to the factory settings

Image Retention Reduction
Menu

Summary of Contents for TH-50PB2W

































































Search results

Summary of Contents for TH-50PB2W

Reviews:

Related manuals for TH-50PB2W

Brands by name

Popular brands

Panasonic TH-50PB2W, Operating Instructions Manual

Search results

Summary of Contents for TH-50PB2W

Reviews:

Related manuals for TH-50PB2W

Brands by name

Popular brands