background image

24

Disposal

A lithium-ion polymer rechargeable battery is built in to the electronic pen. Please discard according to local 
regulations.
When disposing this product, disassemble properly by following the procedure on the next page, and remove the 
internal rechargeable battery.

Do not disassemble this product except when disposing of it.

Danger

   As the rechargeable battery is speci

¿

 cally for this product, do not use it for any other 

device.

Do not charge the removed battery.
• Do not throw the battery in a 

¿

 re, or apply heat to it.

• Do not pierce the battery with a nail, subject it to an impact, or dismantle or modify it.
• Do not let the wires touch any other metal or each other.
• Do not carry or store the battery with a necklace, hair pin, or the like.
• Do not charge, use, or leave the battery in a hot location such as near a 

¿

 re or under the hot sun.

Doing so may cause the battery to generate heat, ignite, or rupture.  

Warning

   Do not place the removed battery, screws, and other items within reach of infants.

Accidental swallowing of such an item may have an adverse effect on the body.
• In the event that you think such an item has been swallowed, consult a doctor immediately.

   In the event of 

À

 uid leaking from the rechargeable battery, take the following measure, 

and do not touch the 

À

 uid with bare hands.

•  Fluid entering into an eye may cause loss of eyesight.

Wash the eye with water immediately without rubbing it, and then consult a doctor. 

•  Fluid getting on your body or clothes may cause in

À

 ammation of the skin or injury.

Suf

¿

 ciently rinse with clean water, and then consult a doctor.

Summary of Contents for TH-50PB2E





























Reviews: