52
3
Setup of SCREENSAVER Time
After selecting TIME OF DAY, INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become
available for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)
SCREENSAVER
START
6:15
START TIME
12:30
FINISH TIME
TIME 15:00
FUNCTION
NEGATIVE IMAGE
MODE
TIME OF DAY
SCREENSAVER
START
12:00
SHOW DURATION
3:00
SAVER DURATION
TIME 15:00
FUNCTION
NEGATIVE IMAGE
MODE
INTERVAL
SCREENSAVER
START
6:15
SCREENSAVER DURATION
TIME 15:00
FUNCTION
NEGATIVE IMAGE
MODE
STANDBY AFTER SCR SAVER
2
change
1
select
Notes:
• Pressing “ ” or “ ” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.
• “SCREENSAVER DURATION” of the “STANDBY AFTER SCR SAVER” can
be set from 0:00 to 23:59. When this is set to “0:00”, “STANDBY AFTER SCR
SAVER” will not be activated.
Note:
Timer function will not work unless “DAY/TIME SETUP” is set.
4
START setting
Select “START”.
SCREENSAVER
TIME 15:00
FUNCTION
NEGATIVE IMAGE
START
ON
MODE
2
set
1
select
The menu screen will disappear and the SCREENSAVER will be activated.
To stop the SCREENSAVER under ON, press the R button or any buttons
on the main unit.
Note:
When the display is turned off, the SCREENSAVER will be deactivated.
SETUP menu
