Manual Tuning
■
Digital TV
Normally use
Auto Tuning
or
Update Channel List
to retune Digital TV
channels.
If tuning has not been done completely or for adjusting the direction of the
aerial, use this function.
●
All Digital TV channels found are added to
Channel List
.
1. Select frequency and offset.
2. Press
OK
to search.
■
Analogue TV
Set Analogue TV channel manually after
Auto Tuning
.
●
Set
Sound System
and
Colour System
, and then perform this function.
Normally set
Colour System
to
Auto
.
1. Select the channel position with
Numeric buttons
.
2. Select the channel with
Channel Up / Down
.
3. Set
Manual Tuning
.
4. Select
Store
and press
OK
to set.
●
Use
Fine Tuning
to make small adjustments to the tuning of an individual
programme (affected by weather conditions, etc.).
●
If a VCR is connected only with the RF cable, select channel position
0
.
- 98 -
Summary of Contents for TH-49FX800H
Page 244: ...Reset to Defaults Resets the current Picture Viewing Mode to the default settings 244 ...
Page 250: ...Reset to Defaults Resets the current Sound Mode to the default settings 250 ...
Page 253: ...TV Name Sets your favourite name for this TV Network Network settings TV Name 253 ...
Page 292: ...ver 4 000 ...
