Panasonic TH-49FX800H Manual Download Page 283

Page: 283 / 292

Digital TV

Before requesting service or assistance, please follow these simple guides to

solve the problem.
If the problem still persists, please contact your local Panasonic dealer for

assistance.

●

Due to the digital reception technologies involved, quality of the Digital TV

signals may be relatively low in some cases, despite good reception of

Analogue TV channels.

Unable to receive signals with a high-performance aerial

●

Install an aerial individually for the TV and VCR (or use a splitter).

Interference or frozen / disappearing image

●

Check

Signal Condition

. If the level of

Signal Quality

is low, check aerial.

Watching > Tuning and editing channels > Signal Condition

●

Turn the TV off with Mains Power On / Off switch, then turn it on again.

- 283 -

Summary of Contents for TH-49FX800H





































































































































































































































































































Search results

Summary of Contents for TH-49FX800H

Reviews:

Related manuals for TH-49FX800H

Brands by name

Popular brands

Panasonic TH-49FX800H, Manual

Search results

Summary of Contents for TH-49FX800H

Reviews:

Related manuals for TH-49FX800H

Brands by name

Popular brands