Panasonic TH-47LFT30W, Service Manual

Page: 25 / 66

25
TH-47LFT30W
4. The top part of the cabinet front and cabinet back are
made like a hinge. Lift the bottom of the cabinet (on the
same side as the main unit control button), then lift the
entire unit to remove the cabinet back, together with the
LCD panel, from the cabinet front.
* The cabinet front is supplied as a single unit part which
includes the touch screen.
8.12. Removing the cabinet back
1. Undo eight screws in the metal panel mounting brackets.
(SCR BIN+SW+W 4X6)
2. Take the following steps to prepare for removing the cabi-
net back together with the power cord, because the
power cord is fitted to the cabinet back.
• Remove the power cord from the clamp which holds the
cords.
• Pull out the coupler K601 for the power board.
• Undo the screws holding the earthed wire.
• Cut the CV band which ties them together.
3. Remove the couplers for the main switch board and the
RC LED board which are fitted on the cabinet back.