![Panasonic TH-43LFE8E Operating Instructions Manual Download Page 9](http://html.mh-extra.com/html/panasonic/th-43lfe8e/th-43lfe8e_operating-instructions-manual_273339009.webp)
9
English
Do not reverse the polarity (+ and -) of the battery
when inserting.
•
Mishandling the battery may cause its explosion
or leakage, resulting in fire, injury or damage to
surrounding properties.
•
Insert the battery correctly as instructed. (see page
12)
Remove the batteries from the remote control
transmitter when not using for a long period of time.
•
The battery may leak, heat, ignite or burst, resulting in
fire or damage to surrounding properties.
Do not burn or breakup batteries.
•
Batteries must not be exposed to excessive heat such
as sunshine, fire or the like.
Precautions for use
Cautions when installing
Do not set up the Display outdoors.
•
The Display is designed for indoor use.
Environmental temperature to use this unit
•
When using the unit where it is below 1 400 m (4 593
ft) above sea level: 0 °C to 40 °C (32 °F to 104 °F)
•
When using the unit at high altitudes (1 400 m (4 593
ft) and higher and below 2 800 m (9 186 ft) above sea
level): 0 °C to 35 °C (32 °F to 95 °F)
Do not install the unit where it is 2 800 m (9 186 ft)
and higher above sea level.
•
Failure to do so may shorten the life of the internal
parts and result in malfunctions.
About space when installing
When using the pedestal (optional accessory), leave
a space of 10 cm (3
15/16
”) or more at the top, left and
right, and 5 cm (1
31/32
”) or more at the rear, and also
keep the space between the bottom of the display
and the floor surface.
If using some other setting-up method, follow the
manual of it. (If there is no specific indication of
installation dimension in the installation manual,
leave a space of 10 cm (3
15/16
”) or more at the top,
bottom, left and right, and 5 cm (1
31/32
”) or more at
the rear.)
Minimum distance:
a
a
b
a: 10 cm
(3
15/16
”)
b: 5 cm
(1
31/32
”)
a
About the screws used when using a wall hanging
bracket that conforms to VESA standards
Inch
model
Screw pitch for
installation
Depth of
screw hole
Screw
(quantity)
43
200 mm × 200 mm
16 mm
M6 (4)
48
200 mm × 200 mm
16 mm
M6 (4)
55
400 mm × 400 mm
16 mm
M6 (4)
65
400 mm × 400 mm
20 mm
M8 (4)
For 43/48/55-inch models
Screw holes other than the above have also been
provided on this unit, however, the screw holes in the
above table are recommended.