53
English
Multi Display Settings
1 to 5 displays can be aligned in horizontal direction and
vertical direction respectively, and those displays are
regarded as one group. The enlarged image is shown on
the combined display.
Multi Display Settings
0
0
Multi Display Settings
Multi display setting
Horizontal scale
Bezel H adjustment
Vertical scale
Bezel V adjustment
Location
Off
2
2
A1
Note
●
The settings are memorised separately for each
input terminal.
●
When the multi display is set to [Off], adjust to
the same angle of view for [Position] (see page
38). Then, set the multi display to [On]. Again,
make fine adjustment of the angle of view for
[Position].
●
The [Position] menu can be adjusted in the multi
display status.
●
During USB input, the Multi Display mode is not
available.
■
Multi display setting
Off
: The display is not divided when enlarged.
On
: The display is divided when enlarged.
When [On] is set, the display aspect is [16:9].
■
Horizontal scale
Set the horizontal scale in the multi display.
1- 5
■
Vertical scale
Set the vertical scale in the multi display.
1- 5
e.g.) Horizontal scale [5] and Vertical scale
[5] is set in the multi display
■
Bezel H adjustment, Bezel V adjustment
Adjust the area of image hidden in the joint
horizontally and vertically respectively.
0 - 100
Display example
Setting value: 0
Displays the entire image including the joint area.
(Suitable when displaying character information
on PC.)
Setting value: 100
Does not display the image of the joint area.
(Suitable when displaying motion pictures.)
■
Enlarged position
Assign the multi display position.
e.g.) Horizontal scale [5], Vertical scale [5]
A1 A2 A3
B1 B2 B3
C1 C2 C3
A4
B4
C4
E1 E2 E3 E4
D1 D2 D3 D4
A5
B5
C5
D5
E5
Select from A1 to A5, B1 to B5, C1 to C5, D1 to D5,
E1 to E5.
●
The displayed content for setting changes
according to the settings for the [Horizontal scale]
and [Vertical scale].
