manualshive.com logo in svg

Panasonic TH-43LFE8E, Operating Instructions Manual

Share
Download
Panasonic TH-43LFE8E Operating Instructions Manual Download Page 25

25

English

Basic Controls

MUTE

Main Power On /
Off switch
(Back of the unit)

43/48/55-inch models

Remote Control Sensor/
Power Indicator

Remote Control Sensor/
Power Indicator

AC socket outlet

AC cord (supplied)

Operate pointing the remote control directly at 

the unit’s Remote Control Sensor.

Note

● 

For normal use, pull out the remote control sensor 

from the edge side of the main unit by operating the 

lever on the rear panel. (see page 23)

● 

Do not put an obstacle between the remote control 

sensor of the main unit and the remote control.

● 

Operate the remote control in front of the remote 

control sensor or from the area where the sensor can 

be seen.

● 

Do not subject the remote control sensor of the main 

unit to the direct sunlight or strong fluorescent light.

1

Connect the AC cord plug to the 

Display.

(see page 13)

2

Connect the plug to the socket outlet.

Note

● 

Main plug types vary between countries. The power 

plug shown at left may, therefore, not be the type 

fitted to your set.

● 

When disconnecting the AC cord, be absolutely 

sure to disconnect the AC cord plug at the socket 

outlet first.

3

Press the <Main Power On / Off 

switch> on the unit to turn the set on: 

Power-On.

● 

Power Indicator: Green (Picture is displayed.)

● 

When the power of the unit is ON, remote control 

operation is possible.

 

■

To turn the power ON/OFF with the remote 

control

Press the standby (ON/OFF) button to turn the Display 

on.

● 

Power Indicator: Green (Picture is displayed.)

Press the standby (ON/OFF) button to turn the Display 

off.

● 

Power Indicator: Red (standby)

Press the <Main Power On / Off switch> on the unit to 

turn the unit off, when the power of the unit is turned on 

or in standby mode.

Note

● 

During operation of the “Power management” 

function, the power indicator turns orange in the 

power off state.
“Power management” function (see page 51)  

65-inch model

Summary of Contents for TH-43LFE8E






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands