Sound
Normal
Normalise
Normal
0
0
0
Off
Treble
0
Mid
Sound Mode
Balance
Bass
Surround
1/2
33
Sound Adjustment
1
Press to display the Sound menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
2
Select to adjust each item.
While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
Normalise
Normalisation)
3
Press to exit from adjust mode.
SDI Sound Output
This menu is available only when selecting a slot that any of the following terminal boards is installed:
HD-SDI Terminal Board with audio (TY-FB10HD), Dual Link HD-SDI Terminal Board (TY-FB11DHD), or Dual HD-SDI
Terminal Board for 3D (TY-FB30DHD3D)
2/2
Sound Out
Left Channel
Right Channel
Channel 1
Channel 1
Off
Level Meter
Off
SDI Sound Output
Item
Details
Left Channel
Channel 1 to Channel 16
Selects left audio channel.
Right Channel
Channel 1 to Channel 16
Selects right audio channel.
Sound Out
On
Off
On:
Enables audio output.
Off:
Disables audio output.
Level Meter
Off
1-8ch
9-16ch
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.
Off:
Hides the audio level meter.
1-8ch
: Displays the audio level meter (1-8ch)
9-16ch:
Displays the audio level meter (9-16ch)
Note:
Bass, Mid, Treble and Surround settings are memorized separately for each Sound Mode.
Item
Details
Sound Mode
Normal:
Emits the original sound.
Dynamic:
Accentuates sharp sound.
Clear:
Attenuates human voice.
Bass
Adjusts low pitch sounds.
Mid
Adjusts normal sounds.
Treble
Adjusts high pitch sounds.
Balance
Adjusts left and right volumes.
Surround
Select On or Off.
Summary of Contents for TH-42PF30W
Page 71: ...71 Memo ...