manualshive.com logo in svg

Panasonic TH-42PF30W, Operating Instructions Manual, Page: 16 / 72

Share
Download
Panasonic TH-42PF30W Operating Instructions Manual Download Page 16

PRESENT  TIME Setup 

PRESENT  TIME    MON  99:99

Set 

PRESENT  TIME

99:99

DAY

MON

PRESENT  TIME Setup 

PRESENT  TIME    MON  99:99

Set 

PRESENT  TIME

10:00

DAY

TUE

Landscape

Portrait

Display orientation

Italiano 

 

Español 

 

ENGLISH (US) 

English (UK) 

Deutsch 

Français 

 

OSD Language

Set

Select

OSD Language

PRESENT TIME Setup

Display orientation

Power ON warning message

The following message may be displayed when turning the unit power ON:

Activate 3D Safety Precautions if you deliver 3D images to unspeci ed audiences for business or other purposes.
If “3D Picture Display” in “3D Settings” is set to “3D”, a warning message is displayed every time the power is 
turned ON. (see page 35)

3D Safety Precautions

No activity power off Precautions

’No activity power off’ is enabled.

If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every time the 
power is turned ON. (see page 41)

These message displays can be set with the following menu: Options menu
 

3D Safety Precautions (see page 56)

 

Power On Message (see page 55)

1 

  Select the 

language.

2 

 Set.

1 

  Select “DAY” or 

“PRESENT TIME”.

2 

  Setup “DAY” or 

“PRESENT TIME”.

1 

  For vertical installation, 

select “Portrait”.

2 

 Set.

1 

 Select “Set”.

2 

 Set.

When 3D images will be viewed by unspeci ed number of   

people or used for commercial applications, someone in

authority should convey the following precautions.

These precautions should be followed in the home as well.

3D Viewing/ 3D Content/ Viewing distance/ 3D Eyewear 

recommendations

 - To enjoy 3D images safely and comfortably, please

   read the Operating Instructions fully.

16

Power On / Off

When  rst switching on the unit

Following screen will be displayed when the unit is turned on for the  rst time.
Select the items with the remote control. Unit buttons are invalid.

Note: 

The screens are not displayed if a tuner board has been equipped when setting up. Also they will not be displayed 
from the next time the power is turned on after the settings are completed once.
Make the settings in the following menus as necessary.
  OSD Language (see page 43)
  PRESENT TIME Setup (see page 34)
  Display orientation (see page 43)

Summary of Contents for TH-42PF30W









































































Reviews:

No comments