Panasonic TH-37PR10A, Operating Instructions Manual

Page: 21 / 52

21
1
2
3
5
4
6
7
Options
On
Weekly Command Timer
Onscreen display
Off Initial INPUT
Initial VOL level
1/3
Off
Off
0
0
Maximum VOL level
Off INPUT lock
Off
Button lock
Off Remocon User level
Off
Advanced PIP
1/3 Options
Off-timer function
INPUT lock
Studio W/B
Advanced PIP
Display size
Initial VOL level
Maximum VOL level
Initial INPUT
Onscreen display
Off
Off
Off
Off
Enable
On
Off
0
Off
Off
0
One screen Advanced PIP
Main screen Sub screen
1 2 3
6 5 4
Advanced PIP
Press to display the Setup menu.
Press to select “OSD Language”.
Press repeatedly.
Each time pressing this button main picture and sub picture will be displayed as above.
(When Advanced PIP is On)
Notes:
• Advanced PIP corresponding signal
Note:
To use , , , buttons for the screen operations, follow the procedures in the previous page.
• If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.
• Sound output is from the picture which is selected in Audio Out (PIP) (See page 25).
• In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of
the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals
displayed on the main picture and depending on the 2-picture display mode.
• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.
• Computer screen picture is displayed in a simpli
fi ed format, and it may not be possible to discern details on them satisfactorily.
• Following combinations of two analog signals cannot be displayed simultaneously;
Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)
• Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.
Sub screen Main screen
NTSC, PAL, SECAM (tuner, video)
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i,
1125/50i, 1250/50i (Component Video, RGB, DVI, SDI,
HDMI)
640x480@60Hz, 852x480@60Hz, 1024x768@60Hz,
1366x768@60Hz (RGB, DVI, HDMI)
1280x768@60Hz (DVI)
TH-42PG10M, TH-42PG10A
TH-37PR10M, TH-42PR10M,
TH-37PR10A, TH-42PR10A
Press and hold until the Options menu is displayed.
Press to select Advanced PIP.
Press to adjust the
menu.
Off : Sets normal
two screen
display mode
(see page 20).
On : Sets Advanced
PIP mode.
Press to exit from
Options menu.