Panasonic TH-103PF12E, Service Manual

Page: 35 / 94

35
TH-103PF12E
6. Disconnect the connectors (SS34, SS35).
7. Remove the flexible cables from the connectors (SS51,
SS52, SS53, SS54).
8. Remove 6 screws and then remove SS2-Board.
9.21. Removal of SS3-Board
1. Remove the Side Angle (L).
(Refer to Removal of the Side Angle (L))
2. Remove 4 screws ( ).
3. Remove 2 screws ( ) and then remove the Reinforce-
ment Angle (lower_left).
4. Disconnect the connectors (SS32, SS33).
5. Remove the flexible cables from the connectors (SS59,
SS60, SS61, SS62).
6. Remove 6 screws and then remove SS3-Board.
9.22. Removal of SS-Board
Ve adjustment is performed by IIC mode after SS board
exchange.
1. Remove the Side Angle (L).
(Refer to Removal of the Side Angle (L))
2. Disconnect the Fan relay connector.
3. Remove 2 screws and then remove the Fan Block (7).
4. Remove the Duct Barrier H.