Panasonic TCP58VT25 - 58" 3D PLASMA TV, Operating Instructions Manual

Page: 8 / 76

8
Accessories/Optional Accessory
Accessories
Remote Control
Transmitter
N2QAYB000486
Batteries for the Remote
Control Transmitter (2)
AA Battery
AC cord
Pedestal
TBLX0158 (TC-P58VT25)
Product Registration Card (U.S.A.)
Operating Instructions
VIERA Concierge and Quick Start Guide
Installing the remote’s batteries
Pull open
Hook Note the correct
polarity (+ or -).
Close
Caution
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types
(such as alkaline and manganese
batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or break batteries.
Accessories
Check you have all the items shown.
Optional Accessory Please contact your nearest Panasonic dealer to purchase the
recommended wall-hanging bracket. For additional details, please
refer to the wall-hanging bracket installation manual.
Wall-hanging bracket
(angle)
TY-WK5P1RW (for 58”)
a: 19.7” (500 mm)
b: 11.8” (300 mm)
TY-WK6P1RW (for 65”)
a: 26.9” (684 mm)
b: 11.8” (300 mm)
Rear of the TV
Holes for wall-hanging
bracket installation
Screw for fixing the TV onto the wall-hanging bracket
(not supplied with the TV)
Depth of screw:
minimum 0.59” (15.0 mm) (58”)
0.55” (14.0 mm) (65”)
maximum 1.18” (30.0 mm)
(View from the side)
a
b
M8
Warning
In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed
contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to prevent
the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the
wall before hanging bracket.
When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting
cables not to press against the wall when the TV is tilted forward.
For safety reasons, remove units no longer being used from their wall-mounted locations.
3D Eyewear (p. 22)
RS232C terminal Specifications
TBLX0192 (TC-P65VT25)
How to assemble (p. 9)
Screwdriver
(for 3D Eyewear)
tc̲p58̲65̲vt25̲eng̲0593.indb 8 tc̲p58̲65̲vt25̲eng̲0593.indb 8 2010/04/14 10:02:20 2010/04/14 10:02:20