Panasonic TCP58VT25 - 58" 3D PLASMA TV, Operating Instructions Manual

Page: 49 / 76

49
Advanced
Network Settings
[IP setting]
Select “IP setting mode” and set to
“Automatic”
Manual setting
Select “IP setting mode” and set to “Manual”
Select the item and press OK
Check the specifications of the broadband router
and enter each IP address
(When IP automatic acquisition in DHCP can be used)
Menu
IP address/DNS settings 1/2
IP setting mode
IP address 192.168.0.5
Subnet mask 255.255.255.0
Default gateway 192.168.0.254
Automatic
The acquired address is displayed.
select
OK
Subnet mask OK 10I 0 . 0 . 0 . 0
change
channel
OK
or
Each IP address is acquired automatically
[DNS settings]
Select “DNS setting mode” and set to “Automatic”
Manual setting
Select “DNS setting mode” and set to “Manual”
Select the item and press OK
Enter each IP address as was specified by the
provider
(When DNS automatic acquisition in DHCP can be used)
Menu
IP address/DNS settings 1/2
IP setting mode
IP setting mode Automatic
Manual
Default gateway 192.168.0.254
DNS setting mode OK
Primary DNS 192.168.0.20
Automatic
Secondary DNS 192.168.0.21
The acquired address is displayed.
select
OK
Primary DNS 10I 0 . 0 . 0 . 0
select
OK
or
Each IP address is acquired automatically
If you are using a broadband router, IP automatic acquisition in DHCP can be
used under normal circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for each device.
Set only if specified by the provider.
It is not required for normal household use.
Proxy address
This is the address of the relay server that is connected to the target
server instead of the browser and sends data to the browser.
Setting is only required if specified by the provider.
Select “Proxy address” and press OK
Proxy port
This number is specified by the provider together with
the Proxy address.
Select “Proxy port” and press OK
Enter the Port number
Proxy port 0
select
OK
or
Allows manual entry of proxy address for relay
server. (normally not required)
Menu VIERA CAST setting
Proxy address
0 Proxy port
select
OK
Enter address
(see “Entering characters” on p. 19)
Proxy address
pr
I
o
Select “OK”
If you perform the Proxy settings, it may make it
impossible to view VIERA CAST movie content.
Network camera setting (p. 33)
Select “Software update” Press OK to start the Software update screen
Follow directions on the screen
* Set “Clock” first. (p. 17)
Check if software update for the TV is
available
VIERA CAST setting
Network cameras list
Software update
Mac address
IP address/DNS settings
00-0b-97-7c-65-e9
Menu
Network settings
Connection test
Network connection Wireless (WiFi)
select
OK
(continued)
The Network settings become effective when you close the menu and run “Connection test”.
tc̲p58̲65̲vt25̲eng̲0593.indb 49 tc̲p58̲65̲vt25̲eng̲0593.indb 49 2010/04/14 10:02:49 2010/04/14 10:02:49