28
Signal Menu
During “RGB” and “PC” input signal modes
Select
Note:
(1) The “Sync on G” setting is applied to both the COMPONENT/RGB and PC input terminals.
Mode
Function
Sync on G
Set to “On” when the input signals from the sources connected to the COMPONENT/RGB (R,
G, B, HD and VD) input terminals and the PC input terminal are “Sync on G” signals.
H-Freq.(kHz)
Shows the horizontal scanning frequency for the video signals which are currently being
displayed (display only).
V-Freq.(Hz)
Shows the vertical scanning frequency for the video signals which are currently being
displayed (display only).
V-Freq. (Hz)
Sync on G
On
31
60
H-Freq.(kHz)
Off
Signal
Change
Exit
MENU
Set up Menu
1.Push the “Menu” Button.
2.Select the “Set up” Menu by pushing the
Position Up “
F
” or Down “
G
” Button and
Access the “Set up” Menu by pushing the
“STR” Button.
3.Select the required mode by pushing the
Position Up “
F
” or Down “
G
” buttons, and
set appropriate function by pushing the
Position Left “
I
” or Right “
H
” buttons.
Mode
Function
COMPONENT/
RGB IN
Select to match the signals from the source connected to the COMPONENT/RGB input
terminals.
Y, P
B
, P
R
signals
P
“Y/PB/PR”
R, G, B, HD, VD signals
P
“RGB”
Panasonic Auto
(4:3)
Set to “4:3” if using the ASPECT-AUTO button function to view 4:3 images in an unchanged
format. If you would like to view 4:3 images in “Just” format, set to “Just”.
OSD Language
Select the on-screen display language (English/Deutsch/Français/Italiano/Español).
Picture
Sound
Signal
Set up
Access
Select
Set up
COMPONENT/RGB IN
OSD Language
4:3
Panasonic Auto (4:3)
Just
RGB
English
Change
Select
Exit
MENU
Y/PB/PR
1,2
3
MENU
STR
