Panasonic SXPR703 - ENSEMBLE PIANO, Service Manual

Page: 21 / 127

circuit.
8.9. WAVE ROM test
Figure-29
- Press the EXECUTE button to start the test.
- The test result (OK or NG) is displayed within thirty seconds. If the
test result is NG, not only the respective IC, but a break or short
circuit in the ADDRESS/DATA BUS as well as in any of the strobe
signal lines may be the cause of the failure.
8.10. SOUND SYSTEM test
Figure-30
- Use the button in the SOUND GROUP to select an item from 1 to 6
as shown in Figure-31 . Press a keyboard key.
Figure-31
1. Generate a full amplitude sine wave in the pitch of each key. (No
touch, fixed stereo center).
21