196
4.9.5.a. IPv4 Ping Execution
On the Ping Execution Menu, pressing "4" opens the IPv4 Ping Execution
screen, as shown in Fig. 4-9-8. On this screen, you can execute the IPv4 ping
command from the Switching Hub to confirm communications with
connected terminals and other devices.
Fig. 4-9-8 IPv4 Ping Execution
Screen Description
Target IP Address: Shows the IP address of the target of the ping. The factory default
setting is 0.0.0.0.
Number of
Request
Shows the number of times of ping. The factory default setting is 10
times.
Timeout Value
Shows the time before timeout occurs. The factory default setting is
3 seconds.
Result
Shows the ping result.
PN28480K Local Management System
Ping Execution -> IPv4 Ping Execution
Target IP Address: 0.0.0.0
Number of Requests: 10
Timeout Value: 3 Sec.
=============== Result ===============
-------------------------------- <COMMAND> -----------------------------------
Set Target [I]P Address [E]xecute Ping
Set [N]umber of Requests [S]top Ping
Set [T]imeout Value [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
