24
25
Water Vessel Inlet Hole
Pan Sensor
Packing
Lid Sensor
Inner Lid
Cleaning
O
For cleaning, remove the Power Plug and ensure that the main body has cooled down.
O
The Packing attached to both the main body and the Inner Lid cannot be removed.
Do not pull on it forcedly. (Since this could result in the Packing coming off or tearing.)
O
After washing, wipe with a dry cloth.
When using for the first time & on every use
After removing,
Wash with a soft sponge and
a mild washing-up liquid.
Mixed rice or casserole etc.
After using seasoning,
wash
promptly
(
since these can cause odours,
)
rot, or rust
Inner Pan
Rice
Scoop
Ladle
Inner Lid
Steam
Cap
Water
Vessel
Steaming
Plate
<Do not use any of the following>
Metal scourers, nylon scourers
impregnated with an abrasive etc.
Do not wash using
the scouring pad.
Benzine, thinner, polish, bleach,
antibacterial alcohol etc.
Dishwasher/dryer or dish dryer
Inner Lid / Filter
Remove and wash with a mild washing-up liquid.
(Also remove and wash the Filter.)
O
Remove and wash both side of the Inner Lid.
O
If the parts of the following illustrations are blocked with
objects such as grains of rice or dirt, remove them with
bamboo skewers, toothpicks or similar utensils.
(
It may cause steam to leak, or cooking contents to
)
jet out.
Pressure
Control Holes
Net of Filter
Holes in the rear
side of the Inner Lid
O
Quickly push the Safety Valve
2 to 3 times with your finger and
wash with running water.
Safety
Valve
Precautions
O
After cooking with seasoning (for mixed rice etc.),
please wash promptly.
(Since these can cause odours, rot, or rust.)
Q
Removing
③
①
Press the button.
(The Inner Lid tilts forward.)
②
Pull out.
③
Slide the Filter up and remove.
Q
Attaching
①
Slide the Filter from top to
bottom to attach it.
②
Insert the Inner Lid into the
grooves.
③
Press into the Outer Lid
until you hear a “click”.
Grooves
②
③
①
* The Filter may loosen or hardly fix in accordance with
use. In that case please replace it.
Inner Surfaces of Outer Lid / Packing
Wipe with a well-wrung cloth.
O
Remove the Steam Cap and wipe the inner surfaces of
the Outer Lid, the attaching portion of the Steam Cap
and the Packing.
Water Vessel Inlet Hole
Wipe with a well-wrung cloth.
O
Wipe water from the inside, and remove objects such as
grains of rice.
(
It may cause the Water Vessel being burnt or steam
)
not jetting out.
Lid Sensor / Pan Sensor / Water Vessel Sensor
Wipe with a well-wrung cloth.
O
If the dirt is hard to remove, dab a
mild washing-up liquid on a nylon
scourer and wipe gently.
Water Vessel Sensor
Note
O
Using the Lid Sensor or Pan Sensor
while they are dirty may result in the
rice being burnt or cooked in an
unsatisfactory way.
O
Using the Water Vessel Sensor while
it is dirty may result in the steam
quantity changing and the rice being
cooked in an unsatisfactory way.
Dirt on Pan Sensor
Steam Cap
Remove and rinse with water.
Precautions
O
Do not remove the Packing.
(
It may cause steam to leak, or
)
cooking contents to jet out.
O
If the Packing came off, please
surely fix it along the groove.
Packing
Q
Removing
①
Pull up to remove.
②
Open while pressing the
button.
Shaft
Button
Shaking makes a noise
because of the metal ball
inside.
Q
Attaching
(In the reverse order to removing.)
①
Insert the shaft and close firmly until it clicks.
②
Attach on the Outer Lid.
(Ensure that it has been attached firmly.)
Clear Frame
Wipe with a well-wrung cloth.
O
Do not wash by pouring in water etc.
Inner Pan
(P.8)
Wash with a mild washing-up liquid.
Precautions
O
Do not use as a washing-up bowl.
(
Since this may result in peeling of
)
the inner coating.
Stoppers / Hooks
Wipe with a well-wrung cloth.
O
If they are blocked with objects such as grains of rice,
remove them with bamboo skewers or similar utensils.
(
It may cause steam to leak, or cooking contents to
)
jet out.
Stoppers
Hooks
Cl
e
a
ning
(W
hen u
s
ing f
o
r the fir
s
t t
im
e
& o
n
e
v
er
y u
s
e
)
