Other
21
VIERA Link (HDMI) related operations no longer
function properly.
• This may occur when the HDMI connections are
changed, after a power failure or after the AC power
supply cord has been removed. Try the following:
– After connecting the TV (VIERA) and this system with
an HDMI cable and turning on the TV (VIERA),
disconnect the AC power supply cord of this system
while leaving the system turned on, and reconnect the
AC power supply cord.
Images and sounds cease. There are interruptions
to the audio.
The power of this system turns off automatically.
(When this system detects a problem, a safety
measure is activated and this system
automatically switches to standby mode.)
• Turn down the volume and try turning this system off
and on again. If you are unable to turn this system off
and on again, try unplugging the AC adaptor then
plugging it in again.
• Is the volume extremely high?
If so, lower the volume.
• Is this system placed in an extremely hot place?
If so, move this system to a cooler place and wait a few
moments and then try to turn it on again.
• Reduce the volume and take other steps to solve the
issue, then wait a while before turning this system on
again. (The protection circuitry will be released.)
• Depending on the combination of the TV and the
connected device used, when the TV is turned off and
on or the input is switched, audio may be temporarily
disabled.
• If the CLR DIALOG indicator and the 3D SRND indicator
light up and the GN-GAME/AV OR-TV indicator keeps
blinking, HDCP 2.2 is not supported by the HDMI
terminal or setup of the TV. Refer to the operating
instructions of the TV for details.
• If you connect this system and are then unable to view
Netflix content, connect the playback device and the TV
directly. (
For further dedicated help, support and advice
about this system please visit:
https://panasonic.jp/support/global/cs/
(This site is in English only.)
If the GN-GAME/AV OR-TV indicator rapidly blinks
continuously, turn this system off, unplug the AC
adaptor, and then consult your dealer.
Advise them of the state of the LED indicators when
contacting them.
