3. Press the
key of the remote controller (“T0E ” changes to
“LD ” of the LCD).
4. Press the
key of the remote controller (“LD ” changes to “LP ”
of the LCD).
5. Set the laser power at 600 W±10% by using VOL+ and VOL- key
of the remote controller. / [Specified range: 600 W±10%]
Caution:
Proceeding on to the subsequent adjustment procedure with the
read power exceeding “over 660 W” will result in damage to the
optical pickup.
6. Set the laser power with the
key of the remote controller (“LP
” changes to “LDOK ” in the LCD).
7. Press the
key of the remote controller (“LDOK ” changes to
“T0E ” on the LDC.
8. Remove the laser power meter. Laser power adjustment is
finished.
<Stick type>
Fig. 7
Summary of Contents for SJ-MJ55GH
