Panasonic SDR-SW20P Operating Instructions Manual Download Page 91

Page: 91 / 121

VQT1M21

Problem

What to check

The display
changes suddenly.

If the demo (camera introduction) video starts, set
[DEMO MODE] to [OFF]. (P.84)

Indications
(remaining pictures,
elapsed time, etc.)
do not appear on
the LCD monitor.

When [DISPLAY] of the [SETUP] menu is set to
[OFF], indications other than warnings and the date
do not appear.

Pictures cannot
be recorded even
though the SD card
is properly inserted.

Is the SD card write-protected? (P.21)
Is the SD card full? Either delete unnecessary

scenes or insert a new card. (P.56)

Is the unit in a recording mode?
Is the card/battery door open?

Motion picture
recording stops on
its own.

Are you using an applicable SD card? (P.20)
Even with applicable SD cards, recording may stop

when using an SD card on which data has been
written many times.
Copy the data to a computer, then format the SD
card on this unit. (Formatting deletes all data on the
SD card.)

Still pictures come
out like mosaics.

When [PICT. QUALITY] is set to [

] and detailed

subjects are recorded, pictures come out like
mosaics. Set to [

] when recording. (P.37)

The unit does not
focus automatically.

Is the unit set to manual focus? Press the [AUTO]

button to set auto focus.

Are you recording a scene that is hard to focus

automatically?
Focus the subject manually. (P.44)

Audio is not output.

Is the volume set low? (P.52)

Summary of Contents for SDR-SW20P


























































































































Search results

Summary of Contents for SDR-SW20P

Reviews:

Brands by name

Popular brands

Panasonic SDR-SW20P, Operating Instructions Manual

Search results

Summary of Contents for SDR-SW20P

Reviews:

Brands by name

Popular brands