Panasonic SDR-SW20P Operating Instructions Manual Download

Page: 62 / 121

VQT1M21

Connect the unit and AC adaptor (P.22), and set the mode dial to a setting
other than [OFF].

Connect the unit and printer with the USB cable (supplied).

Insert the plugs as far as they will go.

Select [PictBridge].

Select the still pictures to print.

Number of
copies (Max. 9)

Set the number of copies.
• To not print the picture, set “0”.
• Repeat steps

and

to select up to 8 still

pictures for printing.

Do not use any other USB connection cables except the supplied one.

(Operation is not guaranteed with any other USB cables.)

Connect the unit directly to the printer without going through a USB hub.
For paper size and print quality, etc., check printer settings.
Avoid the following operations during printing. Otherwise, pictures will not print

correctly:

  • Disconnecting the USB cable
  • Opening the card/battery door
  • Rotating the mode dial
• Shutting off power

With other

products

Printing pictures from
PictBridge printers

Summary of Contents for SDR-SW20P


























































































































Search results

Summary of Contents for SDR-SW20P

Reviews:

Related manuals for SDR-SW20P

Brands by name

Popular brands

Panasonic SDR-SW20P, Operating Instructions Manual

Search results

Summary of Contents for SDR-SW20P

Reviews:

Related manuals for SDR-SW20P

Brands by name

Popular brands