52
LSQT1211
Recording
1
Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
The icon shown in the illustration is displayed
automatically.
2
Move the joystick up to select
[
].
3
Move the joystick left or right to
select the white balance mode.
To restore to the automatic adjustment
Set the white balance mode to [
].
≥
You can also restore the automatic adjustment
by setting the AUTO/MANUAL/FOCUS switch
to AUTO.
1
Select [
], and fill the screen
with a white subject.
2
Move the joystick up to select
[
].
When the [
] display changes from flashing to
on, setting is complete.
≥
When the [
] display continues flashing, the
white balance cannot be set because the place
is dark etc. In this case, use the automatic
white balance.
∫
About the white balance sensor
A
The white balance sensor detects the type of
light source during recording.
Do not cover the white balance sensor during
recording, or it may not function properly.
∫
About the black balance
adjustment (SDR-H250)
This is one of the 3CCD system functions that
automatically adjusts the black when the white
balance is set in the manual adjustment mode.
When the black balance is adjusted, the screen
[
]
Auto white balance adjustment
[
]
Indoor mode (for recording under
incandescent lamps)
≥
Incandescent lights, halogen lamps
[
]
Outdoor mode
≥
Outdoors under a clear sky
[
]
Manual adjustment mode
≥
Mercury-vapor lamps, sodium lamps,
some fluorescent lights
≥
Lights used for wedding receptions at
hotels, stage spotlights in theatres
≥
Sunrise, sunset, etc.
MNL
3/3
3/3 NEXT
NEXT
3/3 NEXT
MNL
3/3
3/3 NEXT
NEXT
3/3 NEXT
MNL
BACK
BACK
BACK
AWB
AWB
To set the white balance manually
MNL
BACK
BACK
BACK
BACK
MNL
BACK
BACK
BACK
A
LSQT1211(PAL_ENG).book 52 ページ ２００７年２月１３日 火曜日 午後１時１４分
