Recording
39
LSQT1211
Recording still pictures
[HDD]
[SD]
This unit can be used for recording still pictures to the internal HDD and an SD card. (
l
16) Before
recording, use the menu to select the recording destination. (
l
below)
When the unit is turned on for the first time, the media select screen for recording still pictures will
appear. Select [HDD] or [SD CARD] and press the joystick.
≥
When this unit is purchased, [PICTURE SIZE] is set to [
] (SDR-H250)/[
] (SDR-H20) for
recording pictures compatible with a wide-screen TV (16:9).
To record pictures with a 4:3 aspect ratio, change the [PICTURE SIZE] setting before recording
(
l
42).
≥
(SDR-H250) Open the lens cover before turning the unit on.
If the unit is turned on with the lens cover closed, the automatic white balance adjustment may not
function properly.
≥
(SDR-H20) Remove the lens cap before turning the unit on.
If the unit is turned on with the lens cap attached, the automatic white balance adjustment may not
function properly.
1
Turn the unit on.
2
Rotate the mode dial to select
.
3
Open the LCD monitor.
4
Press the MENU button, then select [MEDIA SELECT]
#
[HDD] or [SD
CARD] to select the recording destination and press the joystick.
∫
SDR-H250
5
Press the Photoshot button [
]
halfway in order to adjust focusing.
(For auto focusing only)
The shutter speed and the iris/gain value are fixed
and the unit focuses on the subject automatically.
≥
If [O.I.S.] (
l
49) is set to [ON], the image stabilizer
function will become more effective when the
Photoshot button [
] is pressed halfway.
([
] (MEGA optical image stabilizer) will be
displayed.)
2
0.2
MEGA
LSQT1211(PAL_ENG).book 39 ページ ２００７年２月１３日 火曜日 午後１時１４分
