Recording
40
LSQT1211
6
Press the Photoshot button [
]
fully to take the picture.
∫
SDR-H20
5
Press the Photoshot button [
].
The unit automatically focuses on the subject at the
centre of screen (when auto focus is selected).
≥
For information about the number of recordable still pictures (
l
112)
≥
The sound cannot be recorded.
≥
If the write protection switch on the SD card is set to LOCK, it cannot be used for recording. (
l
17)
≥
The Photoshot button [
] on the remote control cannot be pressed halfway. (SDR-H250)
≥
If the [PICT. QUALITY] is set to [
], mosaic-pattern noise may appear on a playback image
depending on the picture content.
≥
Other products may degrade or not play back still pictures recorded with this unit.
∫
To record still pictures clearly
≥
When zooming in on the subject with a magnification of 4
k
or higher, it is difficult to reduce the slight
shaking from holding this unit by hand. We recommend decreasing the zoom magnification and
approaching the subject when recording.
≥
When recording still pictures, hold the unit firmly with your hands and keep your arms stationary at
your side so as not to shake the unit.
≥
You can record stable pictures without shaking by using a tripod and the remote control.
A
Focus indication
±
(The white lamp flashes.):
Focusing
¥
(The green lamp lights up.): When in focus
No mark:
When focusing is unsuccessful.
≥
The focus indication is indicated as follows when the Photoshot
button [
] is not pressed halfway. Please use it as a guide for
recording.
¥
(The green lamp lights up.): When in focus and a good picture can be recorded.
±
(The white lamp lights up.): Almost in focus
B
Focus area
A
B
LSQT1211(PAL_ENG).book 40 ページ ２００７年２月１３日 火曜日 午後１時１４分
