53
Troubleshooting
Please confirm the following issues first.
If any anomaly is still identified, please
contact Panasonic customer service
centre immediately.
When the following
conditions happen
Causes
Solutions
Key operation
is disabled
Press Start but
no operation
Operation stops
(Display current time)
Stop halfway
(Blade does not
work)
Instant dry yeast
is not dispensed.
Timer cannot be
set.
Start kneading
immediately after
timer setting.
Sounds are heard
during operation
and timing
ɑ
Is the power plug removed?
ɑ
“Rice flour” functions starts only from “Soak”. They don’t operate in the very beginning.
ɑ
ġ
The instant dry yeast should be automatically added in depends on the room tempera-
ture and funcfion you have selected.
ɑġ
Yeast dispenser is damp or has static
electricity.
ɑġ
Operation will be stopped if power fails
for more than 10 min.
ɑġ
Are you attempting to make an impossible
timer setting?
The timer needed to complete baking varies
from different menu.
Plug in the power plug.
Wipe with a wrung cloth and air dry.
Use new instant dry yeast.
The dough can be used again if the
operation stops in a dough state.
(P.47)
Please make the setting within the
following range:
ɑ
Bread
After 4 hours and 10 min
ċ
13 h
ɑ
Soft bread
After 4 hours and 30 min
ċ
13 h
ɑ
Rice bread
After 4 hours and 10 min
ċ
13 h
ɑ
French bread
After 5 hours and 10 min
ċ
13 h
ɑ
Whole wheat bread
After 5 hours and 10 min
ċ
13 h
ɑ
Rice flour bread
After 2 hours and 40 min
ċ
13 h
[Timer setting examples]
Menu: bread
Current time: 8:30 p.m.
(LCD screen displays 20:30)
Scope of time settings: 0:40 a.m. to 9:30 a.m.
(“0:40”
ċ
“9:30”)
ɑ
Are the instant dry yeasts dampened?
It is impossible to set the time beyond
the range above.
*
ɑġ
For the bread, Rice bread, French bread and the whole wheat bread functions that
use instant dry yeasts, only the initial “kneading” procedure will be started immediately
after timer setting. (P.12)
(Please consult Panasonic customer service centre.)
*
ɑġ
Since too many ingredients are added and the blade is stucked by the hard ingredients,
the motor is overloaded and the protective device is hence activated, which may cause
the operation to stop immediately.
(Powder still remains upon completion and baking does not happen)
The following sounds are normal.
ɑ
When dough kneading and air discharge are going on,
Ȅ
the sounds of kneading are heard.
Ȅ
the sounds of motor running are heard.
ɑġ
When instant dry yeast and the ingredients of the raisin and nut dispenser are added into
the bread pan.
Ȅ
The sounds of opening the flap valve and the dispenser flap are heard.
(No kneading)
Remedies for misoperations / T
roubleshooting
Tips