RQTX0165
23
1. Press
to turn on the system.
2. Press
to output the test signal.
3. Press
to adjust the volumes of
front speakers to the normal listening level.
Test signal is output from one speaker at a time for two seconds in the following
order.
L
(Front left)
→
C
(Center)
→
R
(Front right)
→
SUBW
(Subwoofer)
4. Press
to stop the test signal.
•
Speaker
Note
Check connections when the speaker does not have output the test signal. (
page 8)
If you feel the output of the center speaker and subwoofer are not balanced with front speakers adjust the speaker
output according to your preference.
1. Output the test signal. (
above step 1 to 3)
2. Press
to select a speaker for adjustment.
SUBW
(Subwoofer)
→
C
(Center)
3. Press
to adjust each speaker’s output level.
The test signal comes from the speaker being adjusted.
Test signal is output again in above order 2 seconds after adjustment.
4. Press
to stop the test signal.
•
•
Adjustment range:
SUBW: OFF, MIN,
1
to
19, MAX
C:
−
6
to
＋
6
Note
To adjust the front speaker volumes, press [VOL –, +]. To adjust the volume balance of left and right front speakers, see
“Adjusting the balance”. (
page 30)
When you select “
OFF
” for subwoofer adjustment, there is no output from the subwoofer.
Even if you adjust each channel level in this adjustment, each channel level setting in each SFC mode does not change.
When you make this adjustment, Dolby Virtual Speaker functions. When playing 2-channel sources, Dolby Pro Logic also works
in conjunction. (
pages 26 and 27)
You can adjust the speaker level while playing movies and music. (
page 29)
•
•
•
•
•
Connection
Checking speaker output
Checking speaker output
You can check audio output with a test signal
Adjusting speaker output
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 23
7/16/2008 1:51:53 PM
