RQ
T
8
5
9
3
5
Si
mp
le
S
etu
p
∫
Attaching to a wall
You can attach all of the speakers to a wall.
≥
The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 k
g
(22 lbs) per screw.
Consult a qualified building contractor when attaching the
speakers to a wall. Improper attachment may result in damage to
the wall and speakers.
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw(s) with the hole(s).
∫
Fitting speaker stands
(not included)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥
The stands must be able to support over 10 k
g
(22 lbs).
≥
The stands must be stable even if the speakers are in a high
position.
Speaker installation options
30 to 35 mm
(1
3
/
16
q
to 1
3
/
8
q
)
‰
7.5 to 9.4 mm
(
19
/
64
q
to
3
/
8
q
)
4.0 to 7.0 mm
(
5
/
32
q
to
9
/
32
q
)
Wall or pillar
‰
3.0 to 4.0 mm
(
1
/
8
q
to
5
/
32
q
)
200 mm
(7
7
/
8
z
)
Center speaker
Surround speaker
Front speaker
In this position, the
speaker will likely
fall if moved to the
left or right.
Move the speaker
so that the screw is
in this position.
e.g.
Speaker stand
(not included)
Plate thickness plus
7 mm to 10 mm (plus
9
/
32
q
to
13
/
32
q
)
e.g.
Center speaker
5 mm (
3
/
16
q
), pitch 0.8 mm (
1
/
32
q
)
Metal screw holes
For attaching to
speaker stands
60 mm (2
3
/
8
q
)
P
o
sitioning the spea
ker
s
HT440En.book Page 5 Thursday, December 29, 2005 7:56 PM
