23
RQ
TX13
25
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
DVD-R/RW
≥
Discs must conform to UDF bridge (UDF 1.02/
ISO9660).
≥
This unit does not support multi-session. Only the
default session is played.
CD-R/RW
≥
Discs must conform to ISO9660 level 1 or 2 (except for
extended formats).
≥
This unit supports multi-session but if there are many
sessions it takes more time for play to start. Keep the
number of sessions to a minimum to avoid this.
USB device
≥
This unit does not guarantee connection with all USB
devices.
≥
This unit does not support USB device charging.
≥
FAT12, FAT16 and FAT32 file systems are supported.
≥
This unit supports USB 2.0 Full Speed.
You can attach all of the speakers (except subwoofer) to
a wall.
≥
The wall or pillar on which the speakers are to be
attached should be capable of supporting 10 k
g
per
screw. Consult a qualified building contractor when
attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
1 Drive a screw (not supplied) into the wall.
2 Fit the speaker securely onto the screw(s) with the
hole(s).
∫
Tips
Use the measurements indicated below to identify the
screwing positions on the wall.
≥
Leave at least 20 mm of space above the speaker and
10 mm on each side to allow enough space for fitting
the speaker.
≥
Never use alcohol, paint thinner or benzine to clean this
unit.
≥
Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Do not use commercially available lens cleaners as
they may cause malfunction.
Cleaning of the lens is
generally not necessary although this depends on the
operating environment.
Speaker installation option
Attaching to a wall
At least 30 mm
‰
7.0 mm to
‰
9.4 mm
Wall or pillar
3 mm to 5 mm
‰
4.0 mm
A
12.3 mm
B
106.7 mm
C
40 mm
D
40 mm
Maintenance
Clean this unit with a soft, dry cloth
Before moving the unit, ensure the disc tray is
empty.
Failure to do so will risk severely damaging
the disc and the unit.
SC-XH50 EB_RQTX1325-B_eng.book Page 23 Friday, January 14, 2011 3:59 PM
