20
RQ
T
9
81
2
You can attach all of the speakers (except subwoofer) to a wall.
≥
The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 k
g
per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers, and personal injury.
1 Drive a screw (not supplied) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
∫
Tips
Use the measurements indicated below to identify the screwing positions
on the wall.
≥
Leave at least 20 mm of space above the speaker and 10 mm on each
side to allow enough space for fitting the speaker.
Speaker installation option
Attaching to a wall
e.g., Center speaker
DO NOT
DO
≥
In this position, the speaker will
likely fall if moved to the left or
right.
≥
Move the speaker so that the
screw is in this position.
[XH300]
Front speaker
[XH300]
Surround speaker
Center speaker
At least 30 mm
‰
7.0 mm to
‰
9.4 mm
Wall or pillar
5.5 mm to 7.5 mm
‰
4.0 mm
A
25 mm
B
198 mm
C
45 mm
D
45 mm
E
41 mm
F
102 mm
G
40 mm
H
40 mm
I
18 mm
J
66 mm
K
25 mm
L
101 mm
M
28 mm
[XH380]
[XH370]
Front/Surround speaker
Attach to a wall without the base and the stand.
∫
To prevent speakers from falling
Front speaker, Surround speaker, Center speaker
≥
You will need to obtain the appropriate screw eyes to match the walls or
pillars to which they are going to be fastened.
≥
Use a string of less than
‰
2.0 mm, which is capable of supporting over
10 k
g
.
e.g.
[XH380]
[XH370]
Front speaker
N
22 mm
O
330 mm
P
172 mm
Q
45 mm
R
45 mm
Wall
Screw eye
(not supplied)
String (not supplied)
Approx. 120 mm
[XH380]
[XH370]
Reattaching the speaker cable
Insert the cable
from the bottom.
Pull out the cable
through the hole.
Leave about
180 mm.
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 20 ページ ２０１２年１２月１０日 月曜日 午後８時２７分
