Positioning/Video connections
ENGLISH
RQT8092
4
4
Simple setup
Positioning
Use only supplied speakers
•
Using other speakers can damage the unit and sound quality
will be negatively affected.
•
Set the speakers up on an even surface to prevent them from
falling. Take proper precautions to prevent the speakers from
falling if you cannot set them up on an even surface.
Caution
•
Use the speakers only with the recommended
system. Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result in the
risk of fire. Consult a qualified service person if
damage has occurred or if you experience a sudden
change in performance.
•
Do not attach these speakers to walls or ceilings.
Positioning for best effect
How you set up your speakers can affect the bass and the sound
field. Note the following points.
•
Place speakers on flat secure bases.
•
Placing speakers too close to floors, walls, and corners can
result in excessive bass. Cover walls and windows with a thick
curtain.
•
Keep your speakers at least 10 mm away from the system for
proper ventilation.
Notes on speaker use
•
You can damage your speakers and shorten their useful life if
you play sound at high levels over extended periods.
•
Reduce the volume in the following cases to avoid damage.
–
When playing distorted sound.
–
When the speakers emit strange noise (howling) from a
microphone or record player, noise from FM broadcasts, or
continuous signals from an oscillator, test disc, or electronic
instrument.
–
When adjusting the sound quality.
–
When turning the unit on or off.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television,
but the picture may be affected with some televisions and set-up
combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the
problem. If it persists, move the speakers further away from the
television.
STEP
1
Place the speaker so that the super tweeter is on the outside.
Super tweeter
Note
You cannot take the front net off the speakers.
Video connections
STEP
2
7
7
7
7
7
Television with COMPONENT VIDEO IN terminals
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
P
R
Y
S VIDEO
OUT
COMPONENT
VIDEO IN
P
R
P
B
Y
Television
(not included)
Back of the
main unit
Video cables
(not included)
Video cable
•
Do not connect the unit through a video cassette recorder
Due to copy guard protection, the picture may not be displayed
correctly.
•
Turn the television off before connecting, and refer to the
television’s operating instructions.
7
7
7
7
7
Television with a VIDEO IN terminal
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
P
R
Y
S VIDEO
OUT
VIDEO IN
Video cable
(included)
Television
(not included)
Back of the
main unit
7
7
7
7
7
Television with an S VIDEO IN terminal
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
P
R
Y
S VIDEO
OUT
S-VIDEO
IN
S-video cable
(not included)
Television
(not included)
Back of the
main unit
S VIDEO OUT terminal
The S VIDEO terminal achieves a more vivid picture than the
VIDEO OUT terminal by separating the chrominance (C) and
luminance (Y) signals. (Actual results depend on the
television.)
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive output
and provide a purer picture than the S VIDEO OUT terminal.
Connection using these terminals outputs the color difference signals
(P
B
/P
R
) and luminance signal (Y) separately in order to achieve high
fidelity in reproducing colors.
•
The description of the component video input terminals depends
on the television or monitor (e.g. Y/P
B
/P
R
,Y/B-Y/R-Y, Y/C
B
/C
R
).
Connect to terminals of the same color.
To enjoy progressive video
Connect to the component video input terminals on a 480p (or
525p) or 576p (or 625p) compatible television. (Video will not be
displayed correctly if connected to an incompatible television.)
Summary of Contents for SC-VK62D
Page 64: ...RQT8092 ﻓﺎرﺳﻰ 33 64 Memo ...
