Getting S
tarted
9
RQ
T
X
11
68
Quick Start
Gu
ide
Up to 30 stations can be set.
≥
“SET OK” is displayed when the stations are set, and the radio tunes to
the last preset station.
≥
“ERROR” is displayed when automatic presetting is unsuccessful.
Preset the stations manually (
B
below).
≥
The FM setting is also shown on the TV display.
Press and hold [PLAY MODE] to display “MONO”.
To cancel the mode, press and hold the button again until “AUTO ST” is
displayed.
≥
The mode is also cancelled when you change the frequency.
Up to 30 stations can be set.
A station previously stored is overwritten when another station is stored in
the same channel preset.
You can select desired source or access playback/menus by using the
START menu.
When “Input Selection” is selected
You can select a desired source from the menu.
≥
DVD/CD (
B
8), FM (
B
left), AUX/TV (
B
below), USB (
B
14)
When a disc is loaded or an USB device is connected, you can also
access playback or menus from the START menu.
e.g.
[DVD-V]
When the on-screen control panel appears
e.g.
[DVD-V]
(when “Playback Disc” is selected from the START menu)
You can operate the playback with the indicated controls.
[Note]
Confirm the audio connection to the AUX/TV terminal on the main unit
when you select “AUX/TV” (
B
7). Reduce the volume on the TV to its
minimum, and then adjust the volume of the main unit.
Preparation
≥
Confirm the audio connection to the AUX/TV terminal (
B
7).
≥
Set “AUTO AUX LINK” to “ON” (
B
15).
During standby mode, when there is audio input to the AUX/TV terminal,
the main unit will automatically turn on and select “AUX/TV” as the
source.
[Note]
When there is no audio input to the AUX/TV terminal for 30 minutes, the
main unit will turn off.
Listening to the radio
Presetting stations automatically
1
Press [RADIO] to select “FM”.
2
Press [MENU].
Each time you press the button:
LOWEST
(factory preset)
:
To begin auto preset with the lowest frequency.
CURRENT:
To begin auto preset with the current frequency.
§
§
To change the frequency, refer to “Manual tuning” (
B
below).
3
Press and hold [OK].
Release the button when “FM AUTO” is displayed.
The tuner starts to preset all the stations it can receive into the
channels in ascending order.
Listening/confirming the preset channels
1
Press [RADIO] to select “FM”.
2
Press the numbered buttons to select a channel.
≥
To select a 2-digit number
e.g. 12: [
S
10]
B
[1]
B
[2]
Alternatively, press [
X
,
W
].
If noise is excessive
Manual tuning
1
Press [RADIO] to select “FM”.
2
Press [SEARCH
6
, SEARCH
5
] to select the
frequency.
≥
To start automatic tuning, press and hold [SEARCH
6
,
SEARCH
5
] until the frequency starts scrolling. Tuning stops
when a station is found.
Presetting stations manually
1 While listening to the radio broadcast
Press [OK].
2 While the frequency is flashing on the display
Press the numbered buttons to select a channel.
≥
To select a 2-digit number
e.g. 12: [
S
10]
B
[1]
B
[2]
Alternatively, press [
X
,
W
], and then press [OK].
Selecting the playback source
Selecting the source from the START menu
1
Press [START] to show the START menu.
This unit automatically turns on.
e.g.
2
Press [
3
,
4
] to select an item and press [OK].
≥
To exit, press [START].
3
Press [
3
,
4
] to make the setting and press [OK].
Selecting the source by the remote control
Press
To select
[DVD]
DVD/CD
[RADIO]
FM
[EXT-IN]
Each time you press the button:
USB:
(
B
14)
AUX/TV:
For audio input through the AUX/TV terminal.
Auto AUX link
DVD/CD
Home Cinema
OK
RETURN
Input Selection
DVD/CD
Home Cinema
OK
Input Selection
Playback Disc
TOP MENU (DVD)
MENU (DVD)
Playback/menu access
RQTX1168-G_eng.book Page 9 Friday, April 23, 2010 4:28 PM
