VQT4L45
3
Caution for AC mains lead
(When using the moulded three pin
mains plug)
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded three
pin mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please en-
sure that the replacement fuse has a rating of 5-
ampere and that it is approved by ASTA or BSI
to BS1362.
Check for the ASTA mark or the BSI mark on
the body of the fuse.
If the plug contains a removable fuse cover you
must ensure that it is refitted when the fuse is re-
placed.
If you lose the fuse cover the plug must not be
used until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the
type of AC mains plug (Figures A and B). Confirm
instructions below.
Illustrations may differ from actual AC mains
plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse
cover.
Figure A
Figure B
Fuse cover
Figure A
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
Caution!
•
CLASS 1
LASER PRODUCT
IEC60825-1:2001
CAUTION
This product contains a laser diode of higher
class than 1.
To ensure continued safety, do not remove
any covers or attempt to gain access to the
inside of the product.
Refer all servicing to quali
fi
ed personnel.
Bottom of product
