11
RQ
T0
A3
8
11
Radio
Preparation
Press [CD/RADIO/AUX] to select “FM” or “AM”.
Manual tuning
Press [
3
] or [
5
] to tune in to the station.
To tune automatically, press and hold the button until the
frequency starts changing quickly.
“STEREO” is shown when a stereo broadcast is being
received.
Using the main unit
1
Press [TUNE MODE] to select “MANUAL”.
2
Press [
2
/
3
] or [
5
/
6
] to tune in to the
station.
Memory presetting
You can preset up to 30 FM and 15 AM stations.
█
Automatic presetting
1
Press [AUTO PRESET] to select “LOWEST” or
“CURRENT”.
2
Press [OK] to start presetting.
The tuner presets all the stations it can receive into
the channels in ascending order.
To cancel, press [
8
].
█
Manual presetting
1
Press [
3
] or [
5
] (main unit: [
2
/
3
] or
[
5
/
6
]) to tune in to the station.
2
Press [OK].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
█
Selecting a preset station
Press the numeric buttons, [
2
] or [
6
] to select
the preset station.
Using the main unit
1
Press [TUNE MODE] to select “PRESET”.
2
Press [
2
/
3
] or [
5
/
6
] to select the preset
station.
Improving the sound quality
When “FM” is selected
1
Press [PLAY MENU] to select “FM MODE”.
2
Press [
Y
,
U
] to select “MONO” and then press
[OK].
To cancel, select “STEREO”.
“MONO” is also cancelled when you change the
frequency.
To memorise the setting
Continue with step 2 of “Manual presetting”.
When “AM” is selected
1
Press [PLAY MENU] to select “BEATPROOF”.
2
Press [
Y
,
U
] to select the setting that provides the
best reception and then press [OK].
AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
1
Press [CD/RADIO/AUX] to select “FM” or “AM”.
2
Press and hold [CD/RADIO/AUX].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps
again.
• Preset frequencies are erased after you change the
setting.
LOWEST
Tuning begins from the lowest
frequency.
CURRENT
Tuning begins from the current
frequency.
ENGLISH
MAX4000E.book Page 11 Tuesday, April 21, 2015 4:57 PM
offset printing
