RQT9478
6
Remote control
Remote control preparation
Inserting the batteries
Using the remote control
VOLUME
WHISPER-MODE
SURROUND
INPUT
SELECTOR
Standby/on button
(
➜
pages 15, 16)
Test signal output
(
➜
page 15)
For using “WHISPER-MODE SURROUND”
(
➜
page 20)
For using “GAME”
(
➜
page 20)
For entering setup mode
(
➜
pages 20 to 23)
For selecting or cancelling
Dolby Virtual Speaker,
Dolby Pro Logic
and SFC mode
(
➜
page 17)
Input mode and remote control code
buttons
(
➜
pages 16, 23)
For adjusting speaker output
(
➜
pages 15, 20)
For adjusting the volume
(
➜
pages 15, 16)
Muting
(
➜
page 20)
For returning to the previous menu
(
➜
pages 20 to 23)
For adjusting/activating settings
(
➜
pages 20 to 23)
(R6/LR6, AA)
Press on the tab to open.
Insert so the poles (
(
and
)
) match those in the
remote control.
Use manganese batteries or alkaline batteries.
• Do not mix old and new batteries.
• Do not use different types of batteries at the same time.
• Do not take apart or short circuit.
• Do not attempt to recharge alkaline or manganese batteries.
• Do not use batteries if the covering has been peeled off.
• Do not heat or expose to
fl
ame.
• Do not leave the batteries in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Mishandling of batteries can cause electrolyte leakage which
can severely damage the remote control.
Remove the batteries if the remote control is not going to be
used for a long period of time. Store them in a cool, dark place.
Remote control signal sensor
Within 7 meters at the front
(The remote controlling
range varies according to the
angles.)
Transmission window
Control panel
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by
the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Before use
Control guide/Remote control preparation
Approx.
30º
Approx.
30º
Control guide
• Do not place an object between the signal sensor and the
remote control.
• Do not expose the signal sensor to the direct sunlight or the
strong light of a
fl
uorescent lamp.
• Keep the transmission window and the system’s sensor free
from dust.
Note
