Panasonic SC-HTX5, Operating Instructions Manual

Page: 22 / 28

RQT9478
22
Functions and settings
To return to the previous
display/To cancel during setting
operation: Press [ RETURN].
Play
Functions and settings
VIERA Link “HDAVI Control” setting
When you do not wish to use VIERA Link “HDAVI Control” ( ➜ page 18), you can set the
unlinked operation by selecting “
OFF
”.
The normal setting is “ ON ” (Linked operation).
1. Press and hold [–SETUP, OFF] for about 2 seconds.
The setting items are displayed. ( ➜ page 21)
2. Press [
w
][
q
] to select “ HDMI ” and press [OK].
3. Press [ w ][ q ] to select “ CTRL ” and press [OK].
4. Press [ e ][ r ] to select “ ON ” or “ OFF ” and press [OK].
ON : When the operation is linked OFF : When the operation is not linked
Factory setting:
ON
5. Press [ RETURN] several times to select “ EXIT ” and press
[OK] to fi nish the setting.
Adjusting the time lag between audio and video by
delaying audio output
You can adjust audio timing to video timing by delaying audio output when pictures arrive after sounds.
1. Press and hold [–SETUP, OFF] for about 2 seconds.
The setting items are displayed. ( ➜ page 21)
2. Press [ w ][ q ] to select “ SOUND DLY ” and press [OK].
3. Press [
e
][
r
] to select the setting and press [OK].
AUTO, OFF, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, 180, 200
Factory setting: AUTO
4. Press [ RETURN] several times to select “ EXIT ” and press
[OK] to fi nish the setting.
• If delaying audio output is not necessary, select “ OFF ”.
• “ AUTO ” is effective only when connecting the Panasonic TV (VIERA) supporting HDAVI
Control 3 and later versions. (Auto Lip Synchronization Function)
• When you connect the Panasonic TV incompatible with HDAVI Control 3 and later
versions or non-Panasonic TV, if “ AUTO ” is set, “ 40 ” (msec) is set.
Switching between dual sounds
You can switch between dual sounds of Dolby Digital signals.
1. Press and hold [–SETUP, OFF] for about 2 seconds.
The setting items are displayed. ( ➜ page 21)
2. Press [
w
][
q
] to select “ DUAL PRG ” and press [OK].
3. Press [
e
][
r
] to select the audio and press [OK].
M1
: Main audio
M2
: Sub channel audio output
M1+M2 : Main + Sub channel audio output
Factory setting:
M1
4. Press [ RETURN] several times to select “ EXIT ” and press
[OK] to fi nish the setting.
Clear audio at low volume
Dynamic range compression function for Dolby Digital. It compresses the dynamic range so
that you can still hear dialogue and leave the sound
fi eld unaffected.
Use this function when you have to turn the volume down, such as late at night.
1. Press and hold [–SETUP, OFF] for about 2 seconds.
The setting items are displayed. (
➜
page 21)
2. Press [
w
][
q
] to select “ DRCOMP ” and press [OK].
3. Press [
e
][
r
] to select the setting and press [OK].
OFF
: Normal playback
STANDARD : The best suited playback for each audio source
MAX
: Always compressed at the maximum level Factory setting:
OFF
4. Press [ RETURN] several times to select “ EXIT ” and press
[OK] to fi nish the setting.
Note