R
Q
T
8606
4
Simple
Se
tu
p
Preparation
≥
To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥
For assembly, use a Phillips-head screwdriver.
≥
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥
There is no difference between the right and left speakers and stands.
≥
For optional wall mount, refer to page 6.
1
Attach the stand to the base.
1
Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do not
crease), pass the folded portion through the hole, and then pull
the rest of the cable through the base.
2
Attach the stand to the base while gently pulling on the
end of the speaker cable.
2
Secure the stand to the base.
3
Attach the speaker to the stand.
1
Pull out the end of the speaker cable and position it
between the ridges.
2
Attach the speaker to the stand.
STEP
1
Assembling the front speakers
The supplied stands are specially
designed for attachment to
Panasonic SB-FS540 front speakers.
Use only as indicated in this setup.
2 Front speakers
(with cover plate)
2 Bases
2 Stands
(with cable)
8 Screws
Base
Cable
Stand
Base
Cable
Pull gently.
Screw
Tighten securely.
Slide the speaker
cable into the groove.
Stand
Base
Screws
Tighten securely.
Cable
Ridges
Stand
Speaker
Stand
Cover plate
Remove before attaching the
speaker and keep for wall-mount
use (
➜
page 6).
A
s
sem
b
ling
the
fr
ont
spe
ake
rs
HT855En.book Page 4 Tuesday, March 7, 2006 2:33 PM
