5
RQTV0110
1
FRONT
L
FRO
NT
L
FRONT
R
FRO
NT
R
SURROUND
L
SURROUND
L
SURROUND
R
SUR
ROU
ND
R
C
(center)
1
FRONT
L
FRO
NT
L
2
FRONT
R
FRO
NT
R
SURROUND
L
SUR
ROU
ND
L
SURROUND
R
SURROUND
R
C
(center)
C
(center)
C
(center)
SUB
(subwoofer)
SUB
(subwoofer)
SUB
(sub
woof
er)
SUB
(sub
woof
er)
3
3
4
4
5
5
6
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
1
1
2
3
2
Front and surround speaker assembly
Attaching the stand to the base
SC-HT60
Thread the speaker cable
through the base.
1
Secure the speaker stand to
the base.
2
Fasten the speaker cable to
the base.
3
Fasten screws
Speaker setup
Step 1
1
1
2
3
2
Attaching the speaker to the stand
Before attaching, check the speaker label.
SB-FS61:
Use as front speakers. Attach the stands with the short cables.
SB-FS62:
Use as surround speakers. Attach the stands with the long cables.
•
•
Fasten screws
Thread speaker cable
through slot
Press the speaker
cable into the
groove
Cover
Remove the cover from the
bottom of the speaker and
attach the speaker to the stand.
1
Connect the speaker cables.
3
2
Secure the speaker to the
speaker stand.
white
white with blue stripe
Note
Preventing the speakers from falling over
Attach screw eyes (not included) to secure the speakers to a wall (diagram on the
left).
Obtain the screws appropriate to the walls and pillars to which they are going to
be fastened.
Consult with a qualified housing contractor concerning the appropriate procedure
when attaching to a concrete wall or a surface that may not have strong enough
support. Improper attachment may result in damage to the wall or speakers.
•
•
screw eye
wall
Fasten screw
SC-HT40GN-offset.indb 5
2/27/2006 11:37:02 AM
