Panasonic SC-HC57, Owner'S Manual

Page: 13 / 24

13
RQT9708
EN
GL
IS
H
To preset the channel
5
While listening to the radio broadcast
Press [OK].
6 Press [
3
,
4
] to select the channel and then
press [OK].
∫ To improve FM sound quality
1 While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select “FM MODE”
and then press [OK].
2 Press [ 3 , 4 ] to select “MONO” and then press
[OK].
≥ This setting can be preset and memorized. To do
so, continue to step 5 of “Manual tuning and
presetting”.
≥
Select “STEREO” in step 2 to return to stereo broadcasts.
≥
“MONO” is canceled if the frequency is changed.
≥ If “MONO” is selected, regardless of the type of signal this
unit is receiving, “FM MONO” is displayed when [DISPLAY] is
pressed. (
> below)
∫
To display the current signal status
Press [DISPLAY].
≥
“STEREO” is displayed when this unit tunes to a stereo
broadcast.
Internet Radio
This unit can output Internet radio if “vTuner for
Panasonic” is installed on your iPhone/iPod touch.
Preparation
≥ Install “vTuner for Panasonic” to your iPhone/
iPod touch.
≥
Install iOS 5.0 or later.
1
Insert the iPhone/iPod touch to this unit.
2
Press [iPod] repeatedly to select “VTUNER”.
{.
“vTuner for Panasonic” starts.
≥ Visit the below website for the following information about
“vTuner for Panasonic”:
http://radio.vtuner.com/panasonic/en/
(Compatible iPhone/iPod touch models and software
versions, purchasing, installation and operation details.)
≥
A pop-up screen may appear on your iPhone/iPod touch.
Follow the indicated instructions.
Sound adjustment
The following sound effects can be added to the
audio output.
1
Press [SOUND] repeatedly to select the effect
and then press [OK].
2
Press [
3
,
4
] to select the setting and then
press [OK].
≥ You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
Clock and Timer
This is a 12-hour clock.
1
Press [SETUP] repeatedly to select “CLOCK”
and then press [OK].
2
Press [ 3 , 4 ] to set the time and then press
[OK].
≥
To display the clock, press [SETUP] repeatedly to select
“CLOCK” and then press [OK] once. The time is displayed for
10 seconds.
(During standby, press [iPod MENU, DISPLAY] once.)
≥
The clock is reset when there is a power failure or when the
AC power supply cord is removed.
≥ Reset the clock regularly to maintain accuracy.
“FM ST”: The FM signal is in stereo.
“FM”:
The FM signal is in monaural.
≥ “FM” is also displayed even if this unit is not
tuned to a station.
Direct-Vocal
Surround
(D.SURROUND) “LEVEL 1”, “LEVEL 2” or
“OFF”.
≥ The factory preset is “OFF”.
Preset EQ
(PRESET EQ) “HEAVY” (heavy), “SOFT”
(soft), “CLEAR” (clear),
“VOCAL” (vocal) or “FLAT”
(flat/off).
≥
The factory preset is “HEAVY”.
Bass (BASS) or
Treble (TREBLE) Adjust the level (
j
4 to
i
4).
Dynamic Bass
(D.BASS) “ON D.BASS” or
“OFF D.BASS”.
≥ The factory preset is
“ON D.BASS”.
Setting the clock
SC-HC57~RQT9708.book 13 ページ ２０１２年３月２日 金曜日 午後２時４分