RQTV016
8
8
g
AMPLIFIER SECTION
RMS OUTPUT POWER both channel driven
simultaneously
10 % total harmonic distortion (THD)
3 W per channel
Output impedance
HEADPHONE
16
Ω
to 32
Ω
MUSIC PORT
14 k
Ω
DC IN Jack
Terminal
14 V
Phone Jack
Terminal
3.5 mm stereo
Music Port Jack
Terminal
3.5 mm stereo
g
TUNER SECTION
Frequency range
FM
87.50 MHz to 108.00 MHz (50 kHz)
AM
522 kHz to 1629 kHz (9 kHz)
520 kHz to 1630 kHz (10 kHz)
g
DAB SECTION
Frequency Band (Wavelength)
Band
III
(UK Only)
11B to 12D (218.640 MHz to 229.072 MHz)
Band
III
(Europe)
5A to 13F (174.928 MHz to 239.200 MHz)
Intermediate frequency
1st : 38.912MHz, 2nd : 2.048 MHz
Sensitivity *BER 4x10
-4
MAX. Input Power
0 dBm
Min Requirement
-96 dBm
Selectivity
Adjacent Channel (Band
III
)
33 dB
Far-Off Channel (Band
III
)
45 dB
DAB memories
20 channels
g
CD SECTION
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3
Sampling frequency
CD
44.1 kHz
MP3
32 kHz, 44.1 kHz, 48 kHz
Bit rate
MP3
32 kbps to 384 kbps
Decoding
16/20/24 bit linear
Pick up
Wavelength
785 nm
Laser power
CLASS 1
Audio Output (Disc)
Number of channels
2 channel
Frequency response
20 Hz to 20 kHz (+1, -2 dB)
Wow and flutter
Below measurement limit
Digital filter
8
D/A converter
MASH (1 bit DAC)
g
SPEAKER SECTION
Type
1 Way, 1 Speaker system
Speaker(s)
Full range
8 cm cone type
6
Ω
Impedance
6
Ω
Input power
6 W (MAX)
Dimensions (W x H x D)
121 mm x 236 mm x 146 mm
g
GENERAL
Power supply
AC 230 to 240 V, 50 Hz
Power consumption
32 W
Dimensions (W x H x D)
220 mm x 236 mm x 146 mm
Mass
With speakers
3.60 k
g
Without speakers
1.30 k
g
Power consumption in standby mode:2.0 W (approx.)
Notes:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Specifications
Sleep timer
The SLEEP timer can turn the unit off after a set time.
Press [SLEEP] to turn the SLEEP function ON/OFF.
Each time you press the button:
30 MIN 60 MIN 90 MIN 120 MIN
OFF (Canceled)
g
To check the remaining time
Press
[SLEEP]
once
The play timer and sleep timer can be used together. The sleep timer always has
priority. Be sure not to overlap timer settings.
•
Sound quality
You can choose one of four types of sound quality.
Press [PRESET EQ] to select the sound quality.
Each time you press the button:
HEAVY CLEAR SOFT
(Adds punch to rock) (Clarifies higher sounds) (For background music)
EQ OFF (Canceled) VOCAL (Adds gloss to vocals)
•
Live Virtualizer
You can create a three-dimensional sound field when listening to stereo sound.
Press [SURROUND] to turn the Live Virtualizer ON/OFF.
The actual effect depends on the source played.
Play timer
You can set the timer to come on at a certain time to wake you up.
Preparation:
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio or music port source, and
set the volume.
Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK
z
PLAY
Original display
Within 5 seconds, press [
2
/
u
] or [
1
/
i
] to set the starting time.
Press [CLOCK/TIMER] to confirm.
Repeat steps 2 and 3 to set the finishing time.
To activate the timer
Press [
z
PLAY] to turn on the timer.
Press [
^
] to turn off the unit.
To
Action
Change the settings
Repeat steps 1 to 4 and 6.
Change the source of volume
Press [
z
PLAY]
to clear
z
PLAY indicator
from the display.
Make changes to the source or volume.
Perform steps 5 and 6.
Check the settings (when the
unit is on or in standby mode)
Press
[CLOCK/TIMER]
repeatedly to select
z
PLAY.
Cancel
Press
[
z
PLAY]
to clear the timer
indicator from the display.
The timer will start at the preset time, with the volume increasing gradually to the
preset level.
The timer comes on at the set time every day if the timer is on.
The unit must be in the standby mode for the timer to function.
If you turn the unit off and on again while the timer is functioning, the finish time
setting will not be activated.
When MUSIC PORT is selected as the source when the timer comes on, the
system turns on and engages MUSIC PORT as the source. If you wish to
playback from the portable audio equipment, activate the equipment’s play
mode and increase the volume. (See the portable audio equipment’s instruction
manual.)
•
•
•
•
•
Timers and others
EQ
➡
Page 2 for the position of remote control buttons.
Note
Note
Note
Setting the time
This is a 24-hour clock.
Press [CLOCK/TIMER] to set the clock.
Press [
2
/
u
] or [
1
/
i
] to select the time within 5 seconds.
(Press and hold to change the time faster.)
Press [CLOCK/TIMER] again.
g
To display the clock when the unit is on
Press
[CLOCK/TIMER]
g
To check the time when the unit is off
Press
[CLOCK/TIMER]
The clock is accurate to within ±60 seconds a month. Readjust if necessary.
Set again after disconnecting the AC mains lead or power failure.
Note
SC-EN35 DBEB.indd 8
28/03/2007 14:20:21
